Care & Maintenance - Kodak RODPJFFPVCW100 User Manual

11. Drill four (4) holes into the wall where you marked. Then, insert the four (4) wall
anchors into the drilled holes.
12. Insert the four (4) hanging screws into the wall anchors with a screwdriver or drill.
Then, mount the screen on the screws with the hanging brackets.
NOTE: The hanging brackets are loose and can slide along the frame so you can
adjust the horizontal position of the projector screen if needed.
CARE & MAINTENANCE
• When the screen is in use, please do not touch the screen surface with hands or
sharp objects.
• Clean the screen surface with a damp, soft cloth. Wipe the screen carefully.
9