Advertisement
search
1
Web site：
https://myhoneywellbuildingsuniversity.com
Select：
Download Center
Download：
Unified Tool
2
2
x
3
HC35WZ2R25
1
x
4
or
Note Chrome 91 (or later) is supported.
The camera comes with the IP address set as DHCP/APIPA by
default. It is not required to switch to a static IP address.
Users may choose to keep the default DHCP/APIPA assigned
IP address.
MAXPRO NVR & Pro-Watch NVR (version 7.0 or later) has a
limitation to only support camera-based Smart Motion Detec-
tion. Camera-based motion detection will not display alarms or
events in the NVR GUI. Server-based motion detection will not
be affected.
Cautions and Warnings
CAUTION: TO REDUCE THE RISK OF
ELECTRIC SHOCK, DO NOT REMOVE COVER
(OR BACK).
NO USER SERVICEABLE PARTS INSIDE.
REFER SERVICING TO QUALIFIED SERVICE
PERSONNEL.
WARNING
To ensure compliance with electrical safety standards,Local
Certified / CSA Certified / UL Listed LPS or Class 2 power
adapters are required. Power over Ethernet (PoE) shall be
provided by listed Information Technology Equipment meeting
the IEEE 802.3af PoE standard. The PoE is not intended to be
connected to exposed (outside plant) networks.
Consult Honeywell for the recommended adapter.
CAUTION
Invisible LED radiation (850 nm). Avoid exposure to beam.
Important Safeguards
•
Read and keep these instructions.
•
Please ensure that your installation area can safely support
HC35WZ2R25
the weight of the camera.
•
Do not aim the camera toward a bright light source for
extended periods to prevent damage to the imager. Avoid
operating the unit under or close to unstable light sources
(may cause flickering), or close to fluorescent lamps or
objects reflecting light.
•
Do not touch the camera lens.
•
Do not drop the camera or subject it to physical shock.
•
Do not use a strong or abrasive detergent when cleaning
the camera.
•
Avoid operating or storing the unit in extremely humid,
dusty, hot/cold environments, where the operating
temperature is outside the recommended range of -40°F
to 140°F (-40°C to 60°C).
•
Avoid operating the unit close to sources of powerful
electromagnetic radiation, such as radio or TV transmitters.
•
The product is only to be connected to PoE network without
routing to outside plant.
•
If powered by a power adapter, the adapter should be
properly grounded. (Consult Honeywell for the
recommended adapter).
•
Installation and dismantling should be performed only by
qualified and experienced technicians.
•
Make sure the power is cut off before the product is being
repaired or installed.
•
The product can be ceiling or wall mounted. When wall
mounted, the Cable Gland will face down and make sure the
height of the product is above 3 meters.
•
Please contact the authorized distributor of Honeywell for
related accessories (Cable Gland, Cable, etc.) for purchase
THIS SYMBOL INDICATES THAT
and installation.
DANGEROUS VOLTAGE
CONSTITUTING A RISK OF
•
The camera should be installed at least 10 centimeters away
ELECTRIC SHOCK IS PRESENT
WITHIN THE UNIT.
from the eave of a building.
•
If a Class I adapter or switch is used to provided power, be
sure that the power cord is firmly plugged into the socket
THIS SYMBOL INDICATES THAT
and confirm the main earth connection.
IMPORTANT OPERATING AND
MAINTENANCE INSTRUCTIONS
ACCOMPANY THIS UNIT.
Advertisement
