Subscribe to Our Youtube Channel
Related Manuals for Better Packages Better Pack 755eS
Summary of Contents for Better Packages Better Pack 755eS
- Page 1 ® Better Pack 755e Series Model 755eS Electronic Tape Dispenser BP755eS OPERATING MANUAL ® ETTER ACKAGES 4 Hershey Drive Ansonia, CT 06401 Web Site: www.betterpackages.com BP P/N: MAN-755eS-OPR File Name: BP755eS-OPERATING MANUAL-23June2014...
- Page 2 INCURRED AS A RESULT OF INFORMATION CONTAINED IN THIS MANUAL Proprietary Notice This publication contains information proprietary and confidential to Better Packages. Any reproduction, disclosure, or use of this publication is expressly prohibited except as Better Packages may otherwise authorize in writing. Better Packages...
-
Page 3: Table Of Contents
TABLE OF CONTENTS Safety Precautions ......Page 4 Technical Data ....... Page 5 Unpacking . -
Page 4: Safety Precautions
This machine is designed for sealing cartons with water activated tape. Any other use will void all warranties and any responsibility or liability of Better Packages, Inc. Read all Safety Precautions and Operating Instructions before powering on and using the machine. -
Page 5: Technical Data
TECHNICAL DATA Size: 21” L x 10.5” W x 9.5” H Dispensing Speed: Up to 32” per second Water Bottle Capacity: 2 quarts Tape Width: 1” to 4” Wide Maximum Roll Size: Up to 600 ft. of tape Up to 7.5” diameter roll Tape Lengths Dispensed: 6”... -
Page 6: Unpacking
UNPACKING When unpacking your new Better Pack Tape Dispenser, check to make sure you have the following items before discarding packing material: Operating Manual • Power Cord • Upper Tape Plate • Water Bottle • Water Tank and 2 Brushes •... -
Page 7: Preparing The Machine For Operation
PREPARING THE MACHINE FOR OPERATION ADJUSTING TAPE ROLL GUIDES Adjust tape roll guides located inside the rear of the machine to accommodate the width for your tape. The guides should be adjusted to minimize roll movement from side to side, but should not be tight against the sides of the roll, which could create excessive drag. - Page 8 3. LOADING TAPE (wound adhesive side in). Take the roll and unwind about 12". Place the roll in the machine so that the strip unwinds off the rear of the roll as the leading end is brought up toward the front of the machine with the adhesive side down.
- Page 9 5. PREPARING THE WATER BOTTLE Fill bottle with water and place in bottle holder so that the spout of the bottle is in the tank. Water Bottle ELECTRICAL CONNECTION Attach power cord to the receptacle in the rear of the machine. Plug machine into a standard power outlet (115Vac - 60 Hz current only).
- Page 10 7. SETTING WATER LEVEL The water level is factory preset to provide proper moistening of the tape adhesive for most types of tape and should not need to be adjusted unless the tape is not sticking to the box properly. If more or less water is needed for optimum performance of your tape, then the water level may need to be adjusted.
-
Page 11: Operating Instructions
TAPECULATOR – Better Packages offers a color-coded measuring device called a “Tapeculator” free to purchasers of Better Pack 755e machines. The Tapeculator is a strip that attaches to the packing bench and helps the packer determine the correct length of the tape required to seal each carton. -
Page 12: Recommended Maintenance
Recommended Maintenance To ensure ongoing performance of your 755eS tape dispensing machine, regular maintenance is important. Maintenance is quite simple and just takes minutes. Without regular maintenance, the efficiency of your equipment will be undermined. The frequency of maintenance depends on many factors, including the volume of machine use. -
Page 13: Fuse Replacement
General Machine Cleaning The feed wheel pushes tape through the machine. Obstructions such as dirt or dried adhesive can divert the tape and cause it to jam. Periodical cleaning of the tape path will mitigate tape jams. Procedure 1. Remove the upper tape plate that sets on the tape next to the feed wheel. Pull tape off from the lower tape plate if it hasn’t already been removed. - Page 14 Packages, Inc. Ansonia, CT at 800-237-9151 (US only) or (203) 926-3700. To locate your local Authorized Distributor/Service Center, visit www.betterpackages.com. Transportation charges on machines or parts returned to Better Packages for service must be prepaid by the customer. Customers will be responsible for freight expenses on parts or machines returned to them.
Need help?
Do you have a question about the Better Pack 755eS and is the answer not in the manual?
Questions and answers