Anynet+ (Hdmi-Cec) Isn't Working - Samsung N5300 E-Manual

Anynet+ (HDMI-CEC) Isn't Working

When Anynet+ (HDMI-CEC) isn't working, these steps may help resolve the problem.
The problem
Anynet+ does not work.
I want to start Anynet+.
I want to exit Anynet+.
Confirm that the device is an Anynet+ device. The Anynet+ system supports Anynet+ devices
only.
Check if the power cord of the Anynet+ device is properly connected.
Check the cable connections of the Anynet+ device.
Go to Anynet+ (HDMI-CEC)
● Settings General
Anynet+ may not function when some other functions are active, including Channel Search,
Smart Hub, Initial Setup, etc.
If you have disconnected and then reconnected the HDMI cable, scan for devices again or turn
your TV off and on.
Move the focus to the Anynet+ device at
button.
Check if the Anynet+ device is properly connected to the TV, and then select
CEC) menu to see if Anynet+ (HDMI-CEC)
● Settings General
Set Anynet+ (HDMI-CEC) to Off.
●
Settings General
Try this!
and see if Anynet+ (HDMI-CEC)
External Device Manager
Source, and then press the up directional
is set to On.
External Device Manager
External Device Manager
- 91 -
has been set to On.
Anynet+ (HDMI-CEC)
Anynet+ (HDMI-
Anynet+ (HDMI-CEC)
Anynet+ (HDMI-CEC)