The Schedule Recording/Timeshift Function Isn't Working; Anynet+ (Hdmi-Cec) Isn't Working - Samsung Q8FNA E-Manual

The Schedule Recording/Timeshift Function Isn't Working

When Timeshift or Schedule recording aren't working, these steps may help resolve the problem.
The problem
Schedule Recording cannot be
used.
"
This function may not be supported depending on the model or geographical area.

Anynet+ (HDMI-CEC) Isn't Working

When Anynet+ (HDMI-CEC) isn't working, these steps may help resolve the problem.
The problem
Anynet+ does not work.
I want to start Anynet+.
I want to exit Anynet+.
Check if there is a USB device connected to the TV.
Recording will automatically stop if the signal becomes too weak.
Check the free space on the USB device. The function will not work if there isn't enough
storage space on the USB device.
Confirm that the device is an Anynet+ device. The Anynet+ system supports Anynet+ devices
only.
Check if the power cord of the Anynet+ device is properly connected.
Check the cable connections of the Anynet+ device.
Go to Anynet+ (HDMI-CEC)
● Settings
Anynet+ may not function when some other functions are active, including Channel Search,
Smart Hub, Initial Setup, etc.
If you have disconnected and then reconnected the HDMI cable, scan for devices again or turn
your TV off and on.
Move the focus to the Anynet+ device at
button.
Check if the Anynet+ device is properly connected to the TV, and then select
CEC) menu to see if Anynet+ (HDMI-CEC)
● Settings
Set Anynet+ (HDMI-CEC) to Off.
● Settings
Try this!
Try this!
and see if Anynet+ (HDMI-CEC)
General External Device Manager
is set to On.
General External Device Manager
General External Device Manager
- 130 -
has been set to On.
Anynet+ (HDMI-CEC)
Source, and then press the up directional
Anynet+ (HDMI-
Anynet+ (HDMI-CEC)
Anynet+ (HDMI-CEC)