Tektronix TDS 684A Performance Verification Manual page 117

Table 2–14: Warranted Characteristics — Environmental
Name
Atmospherics
Dynamics
1, 2
Emissions
1, 2
Susceptibility
TDS 684A & TDS 744 Performance Verification and Specifications
Description
Temperature (no diskette in floppy drive):
TDS 684A: Operating: +4 C to +45 C
TDS 744: Operating: +4 C to +50 C
Non-operating: –22 C to +60 C
Relative humidity (no diskette in floppy drive):
Operating: 20% to 80%, at or below +32 C,
upper limit de-rates to 30% relative humidity at +45 C
Non-operating: 5% to 90%, at or below +41 C,
upper limit de-rates to 30% relative humidity at 60 C
Altitude:
To 4570 m (15,000 ft.), operating
To 12190 m (40,000 ft.), non-operating
Random vibration (floppy diskette not installed):
0.31 g rms, from 5 to 500 Hz, 10 minutes each axis, operating
3.07 g rms, from 5 to 500 Hz, 10 minutes each axis, non-operating
Meets or exceeds the requirements of the following standards:
Vfg. 243/1991 Amended per Vfg. 46/1992
FCC Code of Federal Regulations, 47 CFR, Part 15, Subpart B, Class A
EN 50081–1 European Community Requirements
EN55022 Radiated Emissions Class B
EN55022 Class B Conducted Emission
EN60555–2 Power Harmonics
Meets or exceeds the EMC requirements of the following standards:
EN 50082–1 European Community Requirements
IEC 801-2 Electrostatic Discharge
IEC 801-3 Radiated Susceptibility
IEC 801-4 Fast Transients
IEC 801-5 AC Surge
Warranted Characteristics
2–19