B2. Installing The Charcoal Filter - Samsung ME16A4021AS Installation Instructions Manual

B. RECIRCULATING (NON-VENTED DUCTLESS) (CONT.)
4. Roll the blower unit 90 ° so that fan blade
openings are facing toward the front of the
microwave.
Before Roll
5. Place the blower unit back into the opening.
CAUTION: Do not pull or stretch the blower unit
wiring. Make sure the wires are not pinched.
6. Remove the metal vent fan cover on the back of
the microwave by sliding it up.
7. Close the blower door. Slide blower shield onto
the top of the blower door opening.
SMH8165_XAA_DE68-03587A-10_EN.indd 13
Step-by-step installation guide
8.
After Roll
B2. INSTALLING THE CHARCOAL
1.
2.
3.
•
4.
5.
6.
13
Secure the blower to the microwave using the
blower retaining screws from Step 1.
Blower Retaining
Screw
Back of
Microwave Oven
FILTER
Remove screws on top of grille using a #1
Phillips screwdriver.
Open the door.
Remove the grille.
After push left, Pull the grille straight off.
Install the charcoal filter. When properly installed,
the wire mesh of the filter should be visible from
the front.
Reinstall the grille and the screws.
Close the door.
Insert mesh-side up
Insert mesh-side up
Blower
Retaining
Screws
Charcoal
Filter
6/19/2019 3:44:38 PM