Table of Contents
Advertisement
Health and Safety
WARNING! To avoid electric shock and damage to your device,
do not charge device while it is wet or in an area where it could
get wet. Do not handle device, charger or cords with wet hands
while charging.
Maintaining dust and water resistance
The device is not impervious to dust and water damage in any
situation. It is important that all compartments are closed tightly.
Follow these tips carefully to prevent damage to the device and
maintain dust and water resistance performance:
•
Water resistant based on IP68 rating, which tests submersion
in fresh water deeper than 1.5 meters or keep it submerged for
more than 30 minutes. If device is
exposed to fresh water, dry it thoroughly with a clean, soft cloth; if
exposed to liquid other than fresh water, rinse
with fresh water and dry as directed.
•
Any device which uses accessible compartments or ports that
can be opened should have these sealed or closed tightly to
prevent liquid from entering the system.
•
If the device has been immersed in water or the microphone
or speaker is wet, sound may not be heard clearly during a call.
After wiping the device with a dry cloth, dry it thoroughly before
using it.
•
Do not expose the device to water at high pressure.
•
If the device is dropped or receives an impact, the water and
dust resistant features of the device may be damaged.
Note: Liquid other than fresh water may enter the device faster.
Failure to rinse the device in fresh water and dry it as instructed
may cause the device to suffer from operability or cosmetic issues.
Advertisement
Table of Contents
