Cleaning The Condenser Unit - Hisense DCGE801 User's Operation Manual

Table of Contents

Advertisement

CLEANING THE CONDENSER UNIT

During cleaning, some water may be spilled. It is therefore recommended to place an absorbent
cloth on the floor.
Do not poke into the openings between the condenser unit ribs as this may damage the
condenser unit.
Do not wash the condenser unit in a dishwasher.
42
1
Open the outer
cover. Hold the
levers on the inside
cover and rotate them
upwards. Remove the
inside cover.
2
Remove the inside
cover. Rotate the
condenser unit lever
up.
3
Use the handle
to pull out the
condenser unit.
4,5
Rinse the
inside of the
condenser unit with
running water on both
sides; drain it thoroughly
and replace it.
Use a soft damp cloth
to clean the space
behind the condenser
unit (reach deep into
the opening as far
as the back wall with
your hand); then,
clean all gaskets and
sealing surfaces on the
condenser unit housing
and door.

Advertisement

Table of Contents
loading

Table of Contents