Hisense HDGE80H User's Operation Manual
  1. Manuals
  2. Brands
  3. Hisense Manuals
  4. Dryer
  5. HDGE80H
  6. User's operation manual
Hisense HDGE80H User's Operation Manual

Hisense HDGE80H User's Operation Manual

Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
USER'S OPERATION MANUAL
Before operating this unit, please read this manual
thoroughly, and retain for future reference.
MODEL: HDGE80H
English

Advertisement

Table of Contents
loading

Related Manuals for Hisense HDGE80H

Summary of Contents for Hisense HDGE80H

  • Page 1 USER’S OPERATION MANUAL Before operating this unit, please read this manual thoroughly, and retain for future reference. MODEL: HDGE80H English...
  • Page 2 The following symbols are used throughout the manual and they have the following meanings: Information, advice, tip, or recommendation Warning – general danger Warning – danger of electric shock Warning – danger of hot surface Warning – danger of fire It is important that you carefully read the instructions.

  • Page 3: Table Of Contents

    TABLE OF CONTENTS SAFETY PRECAUTIONS INTRODUCTION 12 DESCRIPTION OF THE DRYER 13 Technical information 14 Control unit PREPARING 16 INSTALLATION AND CONNECTION 16 Selecting the room THE DRYER 19 Adjusting the dryer feet BEFORE FIRST 20 Draining the condensate 21 Connecting to the power mains 22 Moving and transport after installation 23 BEFORE USING THE APPLIANCE FOR THE FIRST TIME 24 DRYING PROCESS, STEP BY STEP (1 - 6)

  • Page 4: Safety Precautions

    Keep the instruction manual handy, near the dryer. Instructions for use are available through Hisense customer service centers. Your dryer is intended solely for household use. If the...
  • Page 5 Follow the instructions for correct installation of the Hisense dryer and connection to the power mains (see chapter »INSTALLATION AND CONNECTION«). All and any repairs or maintenance tasks on the dryer should only be done by trained experts. Unprofessional repair may result in an accident or major malfunction.
  • Page 6 In case of incorrect dryer connection, incorrect use, or servicing by an unauthorized person, the user shall bear the cost of any damage as such damage shall not be covered by warranty. Always use the ducts or hoses supplied with the dryer. Install the dryer in a room with adequate ventilation and a temperature between 10°C and 25°C.
  • Page 7 The appliance may not be in contact with a wall or adjacent furniture. After installation, let the dryer rest still for 24 hours before using it. If the dryer has to be laid down on one of the sides during transport or servicing, place it with its left side, viewing from the appliance front, downwards.
  • Page 8 If the condensate tube is blocked or clogged, then tumble dryer operation is stopped (see chapter »PAUSING AND CHANGING THE PROGRAMME/Full condensate tank«). Before moving the dryer or before storing it in a non-heated room during the winter, the condensate tank has to be emptied.
  • Page 9 After the drying process, unplug the dryer power cord from the power outlet. The dryer uses a heat pump system to heat the air. The system consists of a compressor and a heat exchanger. When the dryer is started, compressor operation (the sound of flowing liquid) or flow of refrigerant may be louder as long as the compressor operates.
  • Page 10 Activate the child lock. See chapter »STEP 4: SELECTING EXTRA FUNCTIONS/Child lock«. Do not let children younger than three years to come near the tumble dryer, unless they are under constant supervision. The dryer is made in compliance with all relevant safety standards.
  • Page 11 Never stop the drying process before it is completed; if you do interrupt the cycle for any reason, be careful when removing the laundry from the drum as it is very hot. Quickly remove the laundry from the drum and spread it to allow it to cool down as quickly as possible.

  • Page 12: Description Of The Dryer

    DESCRIPTION OF THE DRYER FRONT Condensate tank On/off button Programme selector knob Start/pause button Control unit Door Net filter Air vent Heat pump filter 10 Rating plate BACK Power cord Condensate discharge hose Adjustable feet...

  • Page 13: Technical Information

    TECHNICAL INFORMATION (DEPENDING ON THE MODEL) Rating plate with basic information about the dryer is fitted on the front wall of the dryer door opening (see chapter »DESCRIPTION OF THE DRYER«). Width 600 mm Height 850 mm Dryer depth (a) 625 mm Depth with door closed 653 mm...

  • Page 14: Control Unit

    CONTROL UNIT ON/OFF BUTTON PROGRAMME START/PAUSE BUTTON Switching the dryer on and SELECTOR KNOB Use this button to start or off. stop the programme. Upon start-up or during pause, the button light will flash; when the programme is started and in progress, it will be lit continuously.
  • Page 15 EXTRA DRY START DELAY EMPTY THE Lighting of the symbol Option to set a start delay CONDENSATE TANK when the function is selected symbol lighting CLEAN THE FILTER HALF LOAD symbol lighting ANTI CREASE Lighting of the symbol and anti-crease time. CHILD LOCK symbol lighting...

  • Page 16: Installation And Connection

    INSTALLATION AND CONNECTION Remove all packaging. When removing the packaging, make sure not to damage the dryer with a sharp object. SELECTING THE ROOM 10 cm 5 cm 10 cm The dryer may not be in contact with a wall or adjacent furniture. For optimum dryer operation, we recommend observing the clearance from the walls as indicated in the figure.
  • Page 17 Opening the dryer door (bird's-eye view) See chapter »DESCRIPTION OF THE DRYER/ Technical information«. a = 625 mm b = 1134 mm...
  • Page 18 Do not place the dryer behind lockable or sliding door, or door with a hinge on the opposite side of the dryer door hinge. Install the dryer in such way that the door can always be freely opened. Do not place the dryer on a carpet with long fibres as this may impede air circulation. 90°...

  • Page 19: Adjusting The Dryer Feet

    ADJUSTING THE DRYER FEET Level the dryer in longitudinal and traverse direction by rotating the adjustable feet which allow levelling by +/- 1 cm. Use a spirit level and spanner No. 22. Floor on which the dryer is placed must have a concrete base. It should be clean and dry; otherwise, the dryer may slide.

  • Page 20: Draining The Condensate

    DRAINING THE CONDENSATE The moisture from the laundry is extracted in the condenser unit and accumulated in the condensate tank. During the drying process, an indicator light (symbol (9) is lit on the display unit) warns when the condensate tank is full and needs to be emptied. To avoid emptying the condensate tank, run the condensate discharge hose located at the back of the appliance directly into a drain.

  • Page 21: Connecting To The Power Mains

    CONNECTING TO THE POWER MAINS After installation, the dryer should stand still for two hours before it is connected to the power mains; this allows the dryer to stabilize. Connect the dryer to a grounded power outlet. After installation, the wall outlet should be freely accessible.

  • Page 22: Moving And Transport After Installation

    MOVING AND TRANSPORT AFTER INSTALLATION After every drying cycle, a small amount of condensed water will remain in the dryer. Switch on the dryer and choose one of the programmes, then let the appliance operate for approximately half a minute. This will pump out the remaining water and prevent damage to the dryer during transport. If the dryer cannot be transported in the upright position, tilt it to the left side.

  • Page 23: Before Using The Appliance For The First Time

    BEFORE USING THE APPLIANCE FOR THE FIRST TIME Make sure the dryer is disconnected from the power mains; then, open the door by pulling the left side of the door towards you (figures 1 and 2). Before using the dryer for the first time, clean the dryer drum using a soft damp cotton cloth and water (figure 3).

  • Page 24: Drying Process, Step By Step

    DRYING PROCESS, STEP BY STEP (1 - 6) STEP 1: HEED THE LABELS ON THE LAUNDRY Normal wash; Max. Max. Max. Max. Hand wash Do not Sensitive laundry washing washing washing washing only wash temp. temp. temp. temp. 95°C 60°C 40°C 30°C Bleaching...

  • Page 25: Step 2: Preparing For The Laundry Drying Process

    STEP 2: PREPARING FOR THE LAUNDRY DRYING PROCESS Sort the laundry by type and thickness of the fabric (see PROGRAMME TABLE). Close the buttons and zips, tie any ribbons, and turn the pockets inside out. Place very sensitive clothes in a special-purpose laundry bag. (The special-purpose laundry bag is available as an optional accessory.) Drying laundry made of particularly delicate fabrics that may be deformed is not recommended.
  • Page 26 DRYING IN A BASKET (DEPENDING ON THE MODEL) Before the first drying cycle, remove the basket and all packaging from the drum. Laundry may only be dried in the basket when using the timed drying programme. (The basket is available for purchase as an optional accessory at the service centre.) Open the dryer door and insert the laundry.
  • Page 27 SWITCHING ON THE DRYER Connect the dryer to the power mains by plugging in the power cord. Press the (1) ON/OFF button to switch on the dryer (figure 1). With some models, the dryer drum is lit as well (figure 2). (The light in the dryer drum is not suitable for any other use.) The light in the dryer drum may only be replaced by the manufacturer, a service technician or an authorized person.
  • Page 28 LOADING THE DRYER Open the dryer door by pulling the left side of the door towards you (figure 1). Insert the laundry into the drum (after making sure the drum is empty) (figure 2). Close the dryer door (figure 3). Do not insert laundry into the dryer if it has not been wrung or spun (recommended minimum spinning cycle: 800 rpm).

  • Page 29: Step 3: Choosing The Drying Programme

    STEP 3: CHOOSING THE DRYING PROGRAMME Choose the programme by rotating the programme selector knob (2) to the left or to the right (depending on the type of laundry and the desired level of dryness). See PROGRAMME TABLE. The programme selector knob (2) will not rotate automatically during operation.
  • Page 30 PROGRAMME TABLE Programme Max. Programme description Dryness levels load Cotton Storage 8 kg Use this programme for thicker non-sensitive cotton (Cupboard dry) laundry. After drying, it will be dry and ready to be stored in the cupboard. Standard* 8 kg Use this programme for thicker non-sensitive cotton laundry of approximately the same thickness.
  • Page 31 Programme Max. Programme description Dryness levels load 4 kg Use this programme for non-sensitive laundry that is (Timed drying program) still slightly moist and has to be thoroughly dried. In the 90´ time programme, remaining moisture is not detected 60´ automatically.

  • Page 32: Step 4: Selecting Extra Functions

    STEP 4: SELECTING EXTRA FUNCTIONS Activate/deactivate the function by pressing the desired position (before pressing the (3) START/ PAUSE button). Adjust the settings by pressing the relevant function button (before pressing the (3) START/PAUSE button). Functions that can be changed or adjusted with the selected drying programme are partly lit (dimmed).
  • Page 33 START DELAY Desired time when the drying programme should start can be set in advance, which allows more flexibility. Press the position (7) START DELAY (to choose from 0 to 6 hours in 30-minute steps, and from 6 to 24 hours in 1-hour steps (7a) of start delay;...
  • Page 34 ANTI CREASE If you do not intend or cannot remove the laundry from the dryer immediately after the completion of the drying programme, we recommend using the (10) ANTI CREASE function which has to be selected before the start of the drying process. Press on the position (10) ANTI CREASE to choose between 1h, 2h, and 3h (10a) or deactivating this function.
  • Page 35 CHILD LOCK To activate or deactivate the child lock, press the positions (4) EXTRA DRY and (7) START DELAY simultaneously and hold them for at least 3 seconds until the symbol (6) lights up or goes off, respectively. If the child lock is activated, programme or additional functions cannot be changed.
  • Page 36 EXTRA FUNCTION TABLE Programi Cotton Storage (Cupboard dry) • • • • Standard • • • • Easy Iron (Moist for ironing) • • • • Mix (Mixed laundry/Synthetics) Storage (Cupboard dry) • • • Easy Iron (Moist for ironing) •...

  • Page 37: Step 5: Starting The Drying Programme

    STEP 5: STARTING THE DRYING PROGRAMME Press the button (3) START/PAUSE. STEP 6: END OF THE DRYING PROGRAMME At the end of the drying programme, »End« will appear on the display unit , the two red indicator lights will light up, and the (3) START/PAUSE button light and ANTI CREASE (10a) time indicator, if activated or selected, will flash.

  • Page 38: Interruptions And Changing The Programme

    INTERRUPTIONS AND CHANGING THE PROGRAMME INTERRUPTIONS Interrupting the programme process Press the (3) START/PAUSE button to pause/resume a programme. To stop and cancel the drying programme, press the (3) START/PAUSE button and hold it for 3 seconds. The selected programme will stop, and the dryer will start to cool down. Cooling down time depends on the selected programme.
  • Page 39 ADDING LAUNDRY AFTER THE START OF THE PROGRAM Open the dryer door and press the (3) START/PAUSE button. Insert the laundry and press the button (3) START/PAUSE. When loading the laundry, make sure you do not burn yourself when you open the dryer door.

  • Page 40: Maintenance & Cleaning

    MAINTENANCE & CLEANING Before cleaning, make sure to switch off the dryer and disconnect it from the power mains (unplug the power cord from the outlet). The dryer is fitted with a filtering system consisting of several filters that prevent any impurities from entering the heat exchanger system.

  • Page 41: Cleaning The Net Filter In The Door

    CLEANING THE NET FILTER IN THE DOOR Clean the net filter after each drying cycle. Open the filter housing. Pull out the net filter. Gently scrape the filter to remove the lint, i.e. the lining of fibres and threads, with your hand or with a cloth.

  • Page 42: Cleaning The Heat Pump Filter

    CLEANING THE HEAT PUMP FILTER During cleaning, some water may be spilled. It is therefore recommended to place an absorbent cloth on the floor. Open the outer cover. Hold the levers on the inside cover and rotate them upwards. Remove the inside cover.

  • Page 43: Cleaning Of The Heat Exchanger

    CLEANING OF THE HEAT EXCHANGER Do not touch the inner metal parts of the heat exchanger with bare hands. Danger of injury on sharp parts. Use appropriate protection gloves when cleaning the heat exchanger. Incorrect cleaning of the metal fins of the heat exchanger can permanently damage the tumble dryer.

  • Page 44: Emptying The Condensate Tank

    EMPTYING THE CONDENSATE TANK Empty the condensate tank after each drying cycle. If the condensate tank is full, the drying programme will be paused automatically. Symbol (9) will light up on the display unit, indicating that the condensate tank should be emptied.

  • Page 45: Cleaning The Dryer

    CLEANING THE DRYER Always disconnect the dryer from the power mains before cleaning. Clean the dryer exterior using a soft damp cotton cloth. Do not use any solvents or cleaning agents that could damage the dryer (please observe the recommendations and warnings provided by the manufacturers of the cleaning agents). Wipe all parts of the dryer with a soft cloth until dry.

  • Page 46: Troubleshooting

    TROUBLESHOOTING WHAT TO DO ...? Disturbances from the environment (e.g. the power grid) may result in various error reports (see TROUBLESHOOTING TABLE). In such case: • Switch off the dryer and wait at least one minute. • Switch on the dryer and repeat the drying programme. •...

  • Page 47: Troubleshooting Table

    TROUBLESHOOTING TABLE Problem/error Cause What to do? The machine will not • The main switch is not • Check whether the main switch is on. start. switched on. • There is no voltage in the • Check the fuse. power outlet. •...
  • Page 48 Problem/error Cause What to do? • Filters are not clean. • Clean the filters (see chapter Laundry not dried »CLEANING AND MAINTENANCE«). or drying takes too long. • Dryer is placed in a closed • Make sure there is adequate supply of room;...
  • Page 49 Problem/error Indication on the display unit What to do? and description of error System overheating Clean the filter. See chapter »CLEANING AND MAINTENANCE/Cleaning the net filter in the door« or call a service technician. E6, E7, E8 Control unit failure Disconnect the tumble dryer from the power supply.

  • Page 50: Servicing

    In such cases, the costs of repair shall be charged to the user. TYPE: SP15/XXX MODEL: XXXXXX/X IPX4 Art.No.: XXXXXX Ser.No.: XXXXXXXX 220-240 V ~ XX Hz XX A X kg Pmax.: XXXX W RXXXX/XXX kg Additional information, equipment and accessories for maintenance can be obtained through Hisense customer service centers.

  • Page 51: Tips For Drying And Economic Use Your Dryer

    TIPS FOR DRYING AND ECONOMIC USE YOUR DRYER The most economical way of drying is to dry the recommended amount of laundry in each batch (see PROGRAMME TABLE). Drying laundry made of particularly delicate fabrics that may be deformed is not recommended. Use of conditioner in the washing cycle is not necessary as the laundry is soft and smooth after drying in the dryer.

  • Page 52: Disposal

    DISPOSAL Packaging is made of environmentally friendly materials that can be recycled, disposed of, or destroyed without any hazard to the environment. To this end, packaging materials are labelled appropriately. The symbol on the product or its packaging indicates that the product should not be treated as normal household waste.

  • Page 53: Typical Consumption Table

    TYPICAL CONSUMPTION TABLE The table lists the values for drying time and power consumption for drying of a test batch of laundry with various spinning rpm in the washing machine. SPK A Programme 8 kg Cotton Standard Total 1000 1.97 Partial 1400 1.25...
  • Page 54 LOW STANDBY MODE If you do not run a programme or do anything else after switching on the dryer, the dryer will switch off automatically after 5 minutes to save energy. Indicator light on the (3) START/PAUSE button will flash. The display will be reactivated if you rotate the programme selector knob or press the (1) ON/ OFF button or open the dryer door.
  • Page 55 We reserve the right to any changes and errors in the instructions for use.
  • Page 56 SP15 L0 ESSENTIAL HPND AU en (02-20)

Table of Contents