Download Print this page

Axis TU1002-VE Repainting Instructions

Microphone kit

AXIS TU1002-VE Microphone Kit

Repainting Instructions

Table of Contents

Need help?

Do you have a question about the TU1002-VE and is the answer not in the manual?

Page 1 AXIS TU1002-VE Microphone Kit Repainting Instructions...
Page 2 Risks with repainting There are several risks when disassembling or assembling an Axis product. There is always a certain yield loss during assembly. Training of operators and the use of correct tools mediates some of the problems but they can never be fully avoided. Some of the risks include: ESD Damage - Always handle the product in an ESD safe environment.
Page 3 AXIS TU1002-VE Microphone Kit Repaint the product Repaint the product Preparations • If applicable, disassemble the device according to the instructions in this document. • Clean all parts that will be repainted thoroughly to remove grease, dust, or oil. •...
Page 4 AXIS TU1002-VE Microphone Kit Repaint the product Repainting Mesh Screw holes Bracket mount 1. Make sure all necessary preparations of the cover have been made, see Preparations on page 3 . 2. Cover the mesh, screw holes and bracket mount with a protective film.
Page 5 Repainting Instructions Ver. M1.7 AXIS TU1002-VE Microphone Kit Date: January 2022 © Axis Communications AB, 2021 Part No. T10166701...