1. Manuals
  2. Brands
  3. Axis Manuals
  4. Microphone
  5. 2N SIP Mic
  6. User manual

Axis 2N SIP Mic User Manual

Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
2N SIP Mic
User Manual

Advertisement

Table of Contents
loading

Related Manuals for Axis 2N SIP Mic

Summary of Contents for Axis 2N SIP Mic

  • Page 1 2N SIP Mic User Manual...

  • Page 2: Table Of Contents

    Hardware ..........Trigger audio from 2N SIP Mic ....... .

  • Page 3: Introduction

    Introduction The 2N SIP Mic is a two-way network microphone console with a built-in audio management server. It can be easily integrated with Axis network speakers to form a complete public-address system, possible to purchase from a single distributor. Based on open standards, 2N SIP Mic can also be connected to other IT systems.

  • Page 4: Hardware

    15 times after restart. For discovery, you can use Axis IP Utility, ADM or the 2N® Helios IP network scanner found at www.2n.cz/products/2n-network-scanner. If you want to connect the 2N SIP Mic to an Axis product, you need to update your product with the latest firmware. You can download firmware from the 2N website.

  • Page 5: Trigger Audio From 2N Sip Mic

    VoIP PBX, or, if the addressed device is in the same network, as a SIP peer-to-peer connection. To address many speaker zones, the buttons of 2N SIP Mic may be insufficient. It is then possible to instead use paging groups defined in the SIP PBX, in...
  • Page 6 2N SIP Mic Trigger audio from 2N SIP Mic...

  • Page 7: Suggested Use Cases

    A – Use transmit.cgi for public announcements to one speaker group A basic installation for this use case could contain 2N SIP Mic in combination with an Axis network speaker group consisting of products such as AXIS C3003-E, AXIS C1004-E, AXIS C2005 or AXIS C8033.

  • Page 8: D - Use Sip For Public Announcements To One Speaker

    D – Use SIP for public announcements to one speaker A basic installation for this use case could contain 2N SIP Mic in combination with an Axis network speaker group consisting of products such as AXIS C3003-E, AXIS C1004-E, AXIS C2005, or AXIS C8033.

  • Page 9: E - Use Sip For Public Announcements To A Speaker Group

    E – Use SIP for public announcements to a speaker group A basic installation for this use case could contain 2N SIP Mic in combination with an Axis network speaker group consisting of products such as AXIS C3003-E, AXIS C1004-E, AXIS C2005, or AXIS C8033.
  • Page 10 1. Enable DTMF on 2N SIP Mic. 2. Configure a 2N SIP Mic button to send DTMF. 3. Configure the leader speaker to receive DTMF tones. 4. Configure the speaker to trigger the action Play audio clip when receiving a DTMF tone.
  • Page 11 User Manual Ver. M2.3 2N SIP Mic Date: February 2020 © Axis Communications AB, 2019 - 2020 Part No. T10146017...

Table of Contents