Storage Recommendations; Battery Type; Package Contents; Markings On Tool - Stanley FATMAX SFMCMW2651M Original Instructions Manual

The information provided in this section of the manual is
provided in good faith and believed to be accurate at the time
the document was created. However, no warranty, expressed or
implied, is given. It is the buyer's responsibility to ensure that its
activities comply with the applicable regulations.

Storage Recommendations

1. The best storage place is one that is cool and dry away
from direct sunlight and excess heat or cold. For optimum
battery performance and life, store battery packs at room
temperature when not in use.
2. For long storage, it is recommended to store a fully charged
battery pack in a cool, dry place out of the charger for
optimal results.
NOTE: Battery packs should not be stored completely
depleted of charge. The battery pack will need to be recharged
before use.
Labels on Charger and Battery Pack
In addition to the pictographs used in this manual, the
labels on the charger and the battery pack may show the
L
following pictographs:
Read instruction manual before use.
p
See Technical Data for charging time.
q
Do not probe with conductive objects.
r
Do not charge damaged battery packs.
s
Do not expose to water.
t
Have defective cords replaced immediately
u
Charge only between 4 ˚C and 40 ˚C.
v
Only for indoor use.
x
Discard the battery pack with due care for
the environment.
y
Charge STANLEY FATMAX battery packs only with
designated STANLEY FATMAX chargers. Charging
battery packs other than the designated STANLEY
FATMAX batteries with a STANLEY FATMAX
charger may make them burst or lead to other
dangerous situations.
z
Do not incinerate the battery pack.

Battery Type

The following tools operate on two 18 volt battery packs:
SFMCMW2651
These battery packs may be used: SFMCB202, SFMCB204,
SFMCB206. Refer to Technical Data for more information.

Package Contents

The package contains:
1 Lawn mower
1 Charger
1 Grass Collection Bag
1 Side Discharge Chute
1 Safety Key
2 Li‑Ion battery packs (C2, D2, L2, M2, P2, S2, T2, X2,
Y3 models)
1 Instruction manual
NOTE: Battery packs, chargers and kitboxes are not included
with N models. Battery packs and chargers are not included with
NT models.
• Check for damage to the tool, parts or accessories which may
have occurred during transport.
• Take the time to thoroughly read and understand this manual
prior to operation.

Markings on Tool

The following pictograms are shown on the tool:
L
Read instruction manual before use.
Wear ear protection.
Wear eye protection.
Beware of flying objects. Keep bystanders away from
the cutting area.
Directive 2000/14/EC guaranteed sound power.
88
Do not expose to rain.
The blades will continue to rotate after the
machine is switched off.
Date Code Position (Fig. A)
The date code 18 , which also includes the year of manufacture,
is printed into the housing.
Example:
Year and week of Manufacture
2020 XX XX
ENgLiSh
11