Step 13: Level Dishwasher - GE GDT550HGDWW Installation Instructions Manual

Built-in dishwasher
Hide thumbs Also See for GDT550HGDWW:
Table of Contents

Advertisement

Available languages

Available languages

Dishwasher Installation

STEP 13: LEVEL DISHWASHER

IMPORTANT
dish rack operation, wash performance and door operation.
The dishwasher must be leveled left to right and front to back.
This ensures the dish racks will not roll in or out on their own,
close without hitting the side of the tub.
• Remove the lower dish rack and place a level on the door and
lower rack track as shown in Figure R.
legs on the bottom of the dishwasher as illustrated in Figure S.
Ensure all 4 legs are firmly in contact with the floor.
• The dishwasher is properly leveled when the level indicator is
centered left to right and front to back. Also, the dishwasher
door should close without hitting the side of the tub.
• Replace the lower rack.
Figure R
Turn Legs
to Adjust
Figure S
10
Dishwasher must be level for proper
Tip: Prevent unnecessary service charges. Verify dishwasher
is leveled.
Pull the dish racks half way out. They should stay put. Open
without hitting the side of the tub. If the racks roll on their own,
or the door hits the side of tub, relevel the dishwasher.

Advertisement

Table of Contents
loading

This manual is also suitable for:

Gdf540hmfes

Table of Contents