HP ProCurve XL MINI-GBIC Specifications page 5

QuickSpecs
Technical Specifications
© Copyright 2005 Hewlett-Packard Development Company, L.P.
The information contained herein is subject to change without notice.
The only warranties for HP products and services are set forth in the express warranty statements accompanying such products and
services. Nothing herein should be construed as constituting an additional warranty. HP shall not be liable for technical or editorial
errors or omissions contained herein.
Some product specifications are subject to change. For up-to-date information please visit
http://www.hp.com/go/procurve.
5982-4071EN, 05/2005
Notes Notes
Notes Notes
Used with the following Used with the following Used with the following Used with the following
Services Services
Services Services
DA - 12280
When used in the ProCurve Switch gl 10/100/1000 Module (J4908A), the
J8177B Mini-GBIC can be installed in either the upper or lower Mini-GBIC
port, but will block access to the other port.
Requires specific code version for support:
For use with 9300 series modules, requires code 7.08.00a or greater
For use with 5300 series modules, requires code E.09.11 or greater
(excluding E.09.21)
For use with 4100 series modules, requires code G.07.69 or greater
Not supported on dual-personality ports.
PrProCurve 9300 EP 8-Port Mini-GBIC Redundant Management Module
(J4885A)
ProCurve 9300 EP 16-Port Mini-GBIC Module (J4894A)
ProCurve Switch xl 4-Port Mini-GBIC Module (J4878A/B)
ProCurve Switch gl 20-Port 10/100/1000 Module (J4908A)
ProCurve Switch gl 6-Port Mini-GBIC Module (J4893A)
ProCurve 9400sl 40-Port Mini-GBIC Module (J8684A)
Services for accessories are covered under the product in which they are
installed.
Worldwide — Version 1 — June 6, 2005
ProCurve Mini-GBICs ProCurve Mini-GBICs ProCurve Mini-GBICs ProCurve Mini-GBICs
Page 5