Advertisement
User instructions
DRY ASSIST
The door opens automatically, allowing the dishes to be dried perfectly
even at low rinse temperatures, and therefore significant energy savings.
The door opens automatically by a few centimetres at the end of the wash
cycle. The dishwasher remains inactive between the final rinse and the
end of the cycle to allow the load to be properly dried (the display shows
the time remaining to the end of the cycle). The program is interrupted if
the door is opened during this stage. A short beep is emitted and cycle
lights 4 and 5 flash to indicate that the cycle has finished. It starts
automatically if the selected program is compatible with the option. It can
be disabled before starting the program.
There must be sufficient space available for the door to open. The
door must not be forced open and closed before the wash cycle has
ended completely.
1/2 LOAD FLEXI ZONE
Ideal if just a few dishes need to be washed, allowing energy savings. The
dishes should be placed in both baskets and less detergent should be
placed in the detergent dispenser compared to the amount used for a full
load.
DELAY
Allows you to program the dishwasher cycle to start during the required time
period (e.g. night). Press the DELAY button to activate the option. A delay
of 1 hour is shown on the display. Pressing the button repeatedly will allow
you to select the required delay of up to 9, 12 or 24 hours depending on
the model. To cancel the setting, press the button several times until no
numbers appear on the display. The option cannot be selected once the
cycle is running. After the door has been closed, the dishwasher will carry
out a pre-wash cycle, after which the set "cycle delay" option will be
activated.
16
Advertisement
