Dimplex Winslow 36 Owner's Manual page 9

Specifications
Electrical
Voltage: 220V~240V 50Hz
Watts: 1300~1600 Watts
Amps: 6-6.7 A
Wiring: Plug-In
Bulb Type: LED
Dimensions
Winslow 36"
Width: 91.5 cm
Height: 44.1 cm
Height with feet: 51.0 cm
Depth: 12.8 cm
Depth with feet: 27.6 cm
Weight: 11.75 kg
Winslow 42"
Width: 106.7 cm
Height: 46.0 cm
Height with feet: 52.9 cm
Depth: 12.8 cm
Depth with feet: 27.6 cm
Weight 15.3 kg
Winslow 48"
Width: 121.9 cm
Height: 46.0 cm
Height with feet: 52.9 cm
Depth: 12.8 cm
Depth with feet: 27.6 cm
Weight: 16.5 kg
- 16 -
Installation
GROUNDING INSTRUCTIONS
• This product is equipped with a cord that has a
grounding conductor and a grounding plug.
The plug must be plugged into an appropriate
outlet that is properly installed and grounded in
accordance with all local codes and ordinances.
• This heater is for use on 220-240 volts.
• A 13 Amp, 220-240 Volt circuit is required.
A dedicated circuit is preferred, but not essential
in all cases.
WARNING: Electrical outlet wiring must comply
with local building codes and other applicable regulations to reduce the risk of fire,
electric shock, or injury to persons.
WARNING: Do not attempt to wire your own new outlets or circuits. To reduce the
risk of fire, electric shock or injury to persons, always use a licensed electrician.
WARNING: Ensure that the circuit on which the fireplace is to be installed had the
power cut off at the service panel until installation is complete.
- 17 -
EN