GERATEK Kufstein VGS6161 User Manual
  1. Manuals
  2. Brands
  3. GERATEK Manuals
  4. Dishwasher
  5. Kufstein VGS6161
  6. User manual

GERATEK Kufstein VGS6161 User Manual

Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
:GERATEK
EN
EN Dishwasher / User Manual
Kufstein VGS6161

Advertisement

Table of Contents
loading

Related Manuals for GERATEK Kufstein VGS6161

Summary of Contents for GERATEK Kufstein VGS6161

  • Page 1 :GERATEK EN Dishwasher / User Manual Kufstein VGS6161...
  • Page 2 Thank you for choosing this product. This User Manual contains important information on safety and instructions intended to assist you in the operation and maintenance of your appliance. Please take the time to read this User Manual before using your appliance and keep this book for future reference.

  • Page 3: Table Of Contents

    CONTENTS 1.SAFETY INSTRUCTIONS ....................1 1.1. General Safety Warnings ....................1 1.2. Installation Warnings .....................1 1.3. During Use........................2 2.INSTALLATION .........................6 2.1. Machine Positioning .....................6 2.2. Water Connection ......................6 2.3. Water Inlet Hose ......................6 2.4. Electrical Connection ....................7 3.TECHNICAL SPECIFICATIONS ..................8 3.1. General Appearance......................8 3.2.
  • Page 4 8.CLEANING AND MAINTENANCE ................. 17 8.1. Cleaning the Machine and Filters ................17 8.2. Spray Arms ........................17 9.TROUBLESHOOTING ....................18...

  • Page 5: Safety Instructions

    1. SAFETY INSTRUCTIONS 1.1. General Safety Warnings • Read these instructions carefully before using your appliance and keep this manual for future reference. Please check the packaging of your machine before installation and the outer surface of the machine once the packaging has been removed. Do not operate the machine if it appears damaged or if the packaging has been opened.

  • Page 6: Installation Warnings

    1.2. Installation Warnings • Choose a suitable and safe place to install your machine. • Only original spare parts should be used with the machine. Unplug the machine before installation. Your machine must only be installed by an authorised service agent. Installation by anyone other than an authorised agent may cause your warranty to be void.
  • Page 7 • it for other purposes. Commercial use will void the guarantee. Do not stand, sit or place loads on the open door of the dishwasher. Only use detergents and rinse aids produced specifically for dishwashers. Our company is not responsible for any damage that may occur due to misuse.
  • Page 8 be performed by an authorised service company, otherwise the warranty will be void. Before repair work, the machine should be disconnected from the mains. Do not pull the cable to unplug the machine. Switch off the water tap. Operation at a low voltage will cause a decline in performance levels.
  • Page 9 CE Declaration of Conformity We declare that our products meet the applicable European Directives, Decisions and Regulations and the requirements listed in the standards referenced. Disposal of your old machine The symbol on the product or on its packaging indicates that this product may not be treated as household waste.

  • Page 10: Installation

    2. INSTALLATION WARNING: Use the new water inlet hose supplied with your machine, do not use an old machine’s hose. 2.1. Machine positioning When positioning the machine, place it in WARNING: Run water through the an area where dishes can be easily loaded new hose before connecting.

  • Page 11: Electrical Connection

    2.5. Electrical connection WARNING: Your machine is set to operate at 220-240 V. If the mains voltage supply to your machine is 110 V, connect a transformer of 110/220 V and 3000 W between the electrical connection. Connect the product to a grounded outlet protected by a fuse complying with the values in the "Technical Specifications"...

  • Page 12: Technical Specifications

    3. TECHNICAL SPECIFICATIONS 3.2. Technical specifications 12 place Capacity settings Dimensions (mm) Height 850-870 (mm) Width 598(mm) Depth 570(mm) Net weight 30 kg Operating 220-240V voltage / 50 Hz, frequency Total current 10(A) 3.1. General appearance 1. Upper basket with racks Total power 2.

  • Page 13: Fill The Salt

    4.3. Fill the salt (IF AVAILABLE) 4. BEFORE USING To add softener salt, open the salt THE APPLIANCE compartment cap by turning it counter clockwise. (1) (2) At first use, fill the 4.1. Rreparing your compartment with 1 kg salt and water (3) until dishwasher for first use it is almost overflowing.

  • Page 14: Test Strip

    4.4. Test strip Run water Keep the Shake the Wait Set the hardness level of through the strip in the strip. (1min.) your machine. tap (1min.) water (1sec) NOTE: The level is set to 3 as default. If the water is well water or has a hardness level above 90 dF, we recommend that you use filter and refinement devices.

  • Page 15: Filling The Detergent

    Continued use of too much detergent may washed clean. cause machine damage. If rinse aid dosage setting set too height, Using little detergent can result in poor you can see bluish layers on glass and cleaning and you can see whitish streaksin dishes.

  • Page 16: Loading Your Dishwasher

    5. LOADING YOUR WARNING: To avoid any possible DISHWASHER injuries, place long-handle and sharp- pointed knives with their sharp points facing down or horizontally on the baskets. For best results, follow these loading guidelines. Loading the household dishwasher up to the capacity indicated by the manufacturer will contribute to energy and water savings.

  • Page 17: Fixed Rack

    Top basket Upper Basket Fixed Rack Height adjustment Upper basket racks have two positions: Turn the Rail Stop Clips, at the ends of the open (a) and closed (b). You can place cups rails, to the sides to open them (as shown in on the racks to be washed.

  • Page 18: Alternative Basket Loads

    5.2. Alternative basket loads Unsuitable items for dishwashing Lower basket • Cigarette ashes, candle leftovers, polish, paint, chemical substances, iron- alloy materials. • Forks, spoons and knives with wooden, bone, ivory or nacrecoated handles; glued items, items soiled with abrasive, acidic or base chemicals.

  • Page 19: Programme Table

    6. PROGRAMME TABLE Program Intensive Hygiene Auto Super 50’ Quick 30’ Prewash Name: 65°C 70°C Standard program for Suitable Suitable Suitable for Suitable normally for heavily to rinse Suitable normally for lightly soiled daily Auto program soiled dishes for heavily soiled daily soiled Type of Soil:...

  • Page 20: The Control Panel

    7. THE CONTROL PANEL NOTE: If you decide not to start the selected programme, please see the "Changing a Programme" and "Cancelling a Programme" sections. İİİ 5 İ İİ NOTE: When there is insufficient 1. On/Off button softening salt, the Salt Lack Warning Indicator (ii) will illuminate to indicate the 2.

  • Page 21: Cancelling A Programme

    7.2 Cancelling a Programme Buzzer Sound Control Follow the steps below if you would like to To change the buzzer sound level, follow cancel a programme while in operation. the below steps: 1. Open the door and press Programme (2) and Delay (4) buttons simultaneously for 3 Open the door of your machine.
  • Page 22 8. CLEANING AND To remove and clean the filter combination, turn it counter clockwise and remove it by MAINTENANCE lifting it upwards (1).Pull the coarse filter out Cleaning your dishwasher is important to of the micro filter (2).Then pull and remove maintain the machine’s service life Make the metal filter (3).Rinse the filter with lots of sure that the water softening setting (If...
  • Page 23 8.3 Drain Pump Large food residues or foreign objects which were not captured by the filters may block the waste water pump. The rinsing water will then be above the filter. Warning Risk of cuts! When cleaning the waste water pump, ensure that you do not injure yourself on pieces of broken glass or pointed implements.
  • Page 24 9. TROUBLESHOOTING FAULT POSSIBLE CAUSE TROUBLESHOOTING Your Dishwasher is not plugged in. Plug your Dishwasher in. Switch your Dishwasher on by pressing the Your Dishwasher is not switched on. On/Off button. Fuse blown. Check your indoor fuses. The programme does not start.
  • Page 25 FAULT POSSIBLE CAUSE TROUBLESHOOTING Use the correct amount of detergent, as Not enough detergent used. instructed in the programme table. Rinse aid dosage and/or water Increase rinse aid and/or water softener softener setting set too low. level. Whitish stains remains on dishes.
  • Page 26 AUTOMATIC FAULT WARNINGS AND WHAT TO DO TROUBLE POSSIBLE FAULT WHAT TO DO CODE Make sure the water inlet tap is open and water is flowing. Separate the inlet hose from the tap and clean the filter of Water inlet system failure the hose.
  • Page 27 https://vestel-germany.de/de/ 52253525 R35...

Table of Contents