Advertisement
4 | RE3-HHT RE3 Handheld Transmitter
• Transmitters in the ranges, 488 - 524 MHz, 560 - 596
MHz, and 653 - 663 MHz require the transmitter be
used in TV white spaces in the following countries:
AT, DK, IS, MT, NO, ES.
• Transmitters in the ranges, 488 - 524 MHz, 560 - 596
MHz, and 653 - 663 MHz if used outdoor will have
geographical restrictions of operation in the United
Kingdom (UK).
• Transmitters in the range, 823 - 865, require a license
for use in the 823 - 832 MHz range in the following
countries: AT, BE, CY, EL, IE, LV, LT, UK.
• Transmitters in the range, 488 - 524 MHz may only
use the range 510 - 524 MHz in Norway (NO).
Notice!
TV white spaces are gaps between operating
TV broadcast stations where there are no ac-
tive TV broadcasts.
Always consult your national authority before placing
equipment into operation as requirements and
spectrum usage can change.
AU and NZ
This device operates under an ACMA class license and
must comply with all the terms of that license
including operating frequencies.
Licensing information
Licensing: A ministerial license to operate this
equipment may be required in certain areas. Consult
your national authority for possible requirements.
Changes or modifications not expressly approved by
Electro-Voice could void your authority to operate the
equipment. Licensing of Electro-Voice wireless
microphone equipment is the user's responsibility, and
licensability depends on the user's classification and
application, and upon the selected frequencies on
which it will operate. Electro-Voice advises the user to
contact the appropriate telecommunications authority
concerning proper licensing, and before selecting and
ordering frequency bands.
Notices
Battery precautions
• Keep batteries out of the reach of children.
• Observe and install batteries according to the correct
polarity as marked on the battery and the transmitter
battery compartment.
• Do not expose the battery to excessive heat such as
sunshine, fire, or other sources of high heat.
• Always consider the environment issues and follow
local regulations when disposing of batteries.
• Remove depleted battery immediately.
• Danger of explosion if battery is incorrectly replaced.
Replace only with the same or equivalent type.
• Use only disposable LR6 (AA) alkaline or NiMH
batteries.
• Do not mix new batteries with old ones in the
transmitter at the same time.
• Do not use different battery types or models.
• Do not use a leaking battery. If battery leakage
occurs, avoid contact with skin. If contact occurs,
immediately wash thoroughly with soap and water.
• If battery leakage comes into contact with your eyes,
immediately flush with water and seek medical
attention.
• Remove and safely store batteries away from the
transmitter when the transmitter will not be used for
60 or more days.
Replacement parts
Order number
Description
ESP-EF01U362339
RE3-HHT bottom section with slide door
ESP-EF01U362340
RE3-HHT display window
RE3-ACC-HHTSA1
Stand adapter for RE3-HHT transmitter
Compatible products
Order number
Description
ND76-RC3
Wireless head with ND76 capsule
ND86-RC3
Wireless head with ND86 capsule
ND96-RC3
Wireless head with ND96 capsule
RE420-RC3
Wireless head with RE420 capsule
RE520-RC3
Wireless head with RE520 capsule
Ordering information
RE3-HHTNID-5L Handheld TX with no head, 488-524MHz
Not available for sale individually.
Order number
RE3-HHTNID-5L
RE3-HHTNID-5H Handheld TX with no head, 560-596MHz
Not available for sale individually.
Order number
RE3-HHTNID-5H
RE3-HHTNID-6M Handheld TX with no head,
653-663MHz
Not available for sale individually.
Order number
RE3-HHTNID-6M
RE3-HHTNID-8M Handheld TX with no head,
823-865MHz
Not available for sale individually.
Order number
RE3-HHTNID-8M
RE3-HHTNID-T Handheld TX with no head, 803-806MHz
Not available for sale individually.
Order number
RE3-HHTNID-T
Accessories
RE3-ACC-BC2 Two slot battery charger
Two slot battery charger for RE3-BPT and RE3-HHT
transmitters, black
Order number
RE3-ACC-BC2
Advertisement
