Download Print this page

Electro-Voice RE3-RX Quick Start Manual page 2

Re3 diversity receiver
Hide thumbs Also See for RE3-RX:

Advertisement

2 | RE3-RX RE3 Diversity Receiver
Control functions:
Sync data options:
Audio frequency output level:
Audio frequency output
impedance:
Squelch and noise muting:
Output ports:
Power supply:
Finish:
Dimensions:
Net weight:
Gross weight:
Dimensions:
210 mm
155 mm
175 mm
For full operational information, download the RE3
installation manual at www.electrovoice.com.
Power, scan, frequency, group,
channel, squelch, TX sensitivity, TX
attenuation, TX RF power, TX auto off,
TX key lock, TX display info, TX sync
configuration, RX output volume, RX
output level, RX antenna booster
power, RX key lock, RX display
contrast, RX display brightness, RX
system reset.
Frequency, group, channel,
sensitivity level, attenuation status,
RF power, auto off status, key lock
status, transmitter display (freq or
Gp/Ch)
Ref:±22.5kHz Dev@1kHz Tone
¼" (6.3mm) Phone Jack:-10dBV
XLR
Jack:-4dBV(Line)、-24dBV(MIC)
240Ω (unbalanced)
1400Ω (balanced)
Noise muting and tone code locking
1 x balanced XLRM jack
1 x unbalanced ¼" TS (6.3mm) jack
DC12~15V/500mA
Black polyurethane paint
Width: 8.27 in. (210mm)
Height: (with feet attached) 1.85 in.
(47mm)
Height: (without feet attached) 1.73
in. (44mm)
Depth: (including antenna jack) 6.89
in. (175mm)
Depth: (not including antenna jack)
6.1 in. (155mm)
2.71 lb (1.23 kg)
3.28 lb (1.49 kg)
Licensing and certification declarations:
IC: This Class B digital apparatus complies with
Canadian ICES-003. Cet appareil numérique de la
classe B est conforme à la norme NMB-003 du Canada.
This device complies with Industry Canada license-
exempt RSS standard(s). Operation is subject to the
following two conditions:
(1) This device may not cause interference, and
(2) This device must accept any interference, including
interference that may cause undesired operation of
the device.
Le présent appareil est conforme aux CNR d'Industrie
Canada applicables aux appareils radio exempts de
licence. L'exploitation est autorisée aux deux
conditions suivantes :
(1) l'appareil ne doit pas produire de brouillage, et
(2) l'utilisateur de l'appareil doit accepter tout
brouillage radioélectrique subi, même si le brouillage
est susceptible d'en compromettre le fonctionnement.
CE and EU: The CE Declaration of Conformity can be
obtained and downloaded from:
www.electrovoice.com
This Equipment is in compliance with CE requirements
and the following directives:
• 2011/65/EU RoHS Directive
• 2012/19/EU WEEE Directive
• 2014/53/EU RED Directive
AU and NZ: This device is in compliance with Cispr32.
Replacement parts
Order number
Description
ESP-EF01U362330
RE3 rubber feet, skid pads and screws
ESP-EF01U362333
RE3 antenna, 5L band, 480-524MHz
ESP-EF01U362334
RE3 antenna, 5H band, 560-596MHz
ESP-EF01U362335
RE3 antenna, 6M band, 653-663MHz
ESP-EF01U362336
RE3 antenna, 8M band, 823-865MHz
ESP-EF01U362337
RE3 antenna, T band, 803-806MHz
ESP-EF01U362338
RE3 receiver power supply with AC clips

Advertisement

loading