Monitor Menu; Boot Menu - Asus STRIX Z270G GAMING Manual

3.7

Monitor menu

The Monitor menu displays the system temperature/power status, and allows you to change
the fan settings.
Qfan Configuration
Qfan Tuning
Click this item to automatically detect the lowest speed and configure the minimum
duty cycle for each fan.
W_PUMP+ Control
[Disabled]
[Auto]
[DC mode]
[PWM mode]
3.8

Boot menu

The Boot menu items allow you to change the system boot options.
Fast Boot
[Disabled]
[Enabled]
The following items appear only when you set the Fast Boot to [Enabled].
Next Boot after AC Power Loss
[Normal Boot]
[Fast Boot]
Setup Mode
[Advanced Mode] This item allows you to go to Advanced Mode of the BIOS after POST.
[EZ Mode]
CSM (Compatibility Support Module)
This item allows you to configure the CSM (Compatibility Support Module) items to fully
support the various VGA, bootable devices and add-on devices for better compatibility.
Launch CSM
[Auto]
[Enabled]
[Disabled]
3-20
Disable the Water Pump control feature.
Detects the type of water pump installed and automatically switches
the control modes.
Enable the Water Pump control in DC mode for 3-pin chassis fan.
Enable the Water Pump control in PWM mode for 4-pin chassis fan.
Allows your system to go back to its normal boot speed.
Allows your system to accelerate the boot speed.
Returns to normal boot on the next boot after an AC power loss.
Accelerates the boot speed on the next boot after an AC power loss.
This item allows you to go to EZ Mode of the BIOS after POST.
The system automatically detects the bootable devices and the add-
on devices.
For better compatibility, enable the CSM to fully support the non-UEFI
driver add-on devices or the Windows
Disable the CSM to fully support the non-UEFI driver add-on devices
or the Windows UEFI mode.
®
UEFI mode.
®
Chapter 3: BIOS Setup