Internal Connectors - Asus STRIX Z270G GAMING Manual

1.1.8

Internal connectors

1. Intel Serial ATA 6 Gb/s connectors (7-pin SATA6G_12, SATA6G_34,
®
SATA6G_56)
These connectors connect to Serial ATA 6 Gb/s hard disk drives via Serial ATA 6 Gb/s
signal cables.
If you installed Serial ATA hard disk drives, you can create a RAID 0, 1, 5, and 10
configuration with the Intel
Z270 chipset.
• These connectors are set to [AHCI] by default. If you intend to create a Serial ATA
RAID set using these connectors, set the SATA Mode item in the BIOS to [Intel RST
Premium With Intel Optane System Acceleration (RAID)].
• Before creating a RAID set, refer to the manual bundled in the motherboard support
DVD.
ROG STRIX Z270G GAMING
Rapid Storage Technology through the onboard Intel
® ®
1-13