Table of Contents
Advertisement
global_main.book.book Page 32 Friday, November 5, 2021 3:27 PM
MAINTENANCE
32
so, or more often if the water is very hard or
contains traces of limescale.
• Turn off the water supply taps to the appliance if
the appliance is to be left for a certain period of
time (e.g. holiday), especially if there is no floor
drain (gully) in the immediate vicinity.
•
error message will be displayed on the
1E
control panel when the water is not entering the
detergent drawer.
1
Turn off the power and the water tap and then
unscrew the water inlet hose.
2
Remove the water inlet filter with small pliers
and then clean the filter using a medium bristle
tooth brush.
Advertisement
Table of Contents
