Installing The Drain Hose - LG FT015V9BL Owner's Manual

global_main.book.book Page 15 Friday, November 5, 2021 3:27 PM
3
Connect one end of the cold water supply hose
connector to the cold water supply hose of
a
the Main Washer first.
4
Connect the additionally provided water supply
hose of Main Washer to the cold water supply
hose connector and cold water tap.
NOTE
• Make sure the water supply hose is not kinked or
pinched.

Installing the Drain Hose

Needed Accessories
Water Drain Hose
a
Water Drain Hose Connector
b
c Band Clamps (3 EA)
INSTALLATION
Connecting the Drain Hose to
the Mini Washer
The drain hose should not be placed higher than
100 cm above the floor. Water in the appliance may
not drain or may drain slowly.
1
Insert the band clamp onto the drain hose
elbow. Pliers may be required to open the
clamp so it can be fitted to the rubber end of
the hose.
2
With the hose leading up from the elbow,
firmly insert the elbow onto the drain outlet on
the back of Mini Washer.
3
Adjust the band clamp with pliers to keep the
hose securely in place and prevent leaking.
Connecting the Drain
Connector
1
Insert the included band clamps on to the ends
of the two drain hoses.
2
Connect the drain hose of Main Washer and
Mini Washer to the drain connector.
3
Connect the drain hose to the drain spigot on
the laundry sink or bench top fitting.
15