Headlight; Vehicle Information / Inspection - URBANGLIDE BIKE 140 User Manual

14. Headlight

To turn on the rear lights, simply press the button directly on the rear light. There are two status:
constant and flashing.
Warning: The light consumes battery, avoid leaving it on if it is not necessary.

15. Vehicle Information / Inspection

In this part, you can check the voltage,
application version and the vehicle ID.
In the headlight settings, you can choose the below two
modes:
1. Manual: You can manually control the headlight of
your bike through the application or the button on the
handlebar.
2. Auto: The light turns on and off automatically
depending on the brightness of location of the bike.
This setting allows you to check the status of
all components of the electric bike. If there is
a malfunction, it will be automatically
detected.
8