JVC CA-MXDK51 Instructions Manual page 7

~
AM/FM antenna
To assemble the AM loop antenna
To connect AM/FM antenna
FM antenna (supplied)
Extend it so that you can
obtain the best reception.
AM loop antenna
(supplied)
Turn it until the best
reception is obtained.
For better AM/FM reception
FM outdoor antenna
(not supplied)
AM loop antenna (supplied)
Keep it connected.
Vinyl-covered wire (not supplied)
Extend it horizontally.
• Disconnect the supplied FM antenna, and connect to an
outdoor FM antenna using a 75
connector (IEC or DIN45325).
• Make sure the antenna conductors do not touch any other
terminals, connecting cords or the power cord. Also, keep
the antennas away from metallic parts of the System,
connecting cords, and the AC power cord. This could cause
poor reception.
Ω
wire with coaxial type
Ÿ
TV/monitor
Green
Blue
Red
Component
video cord
(not supplied)
S-video cord
(not supplied)
• Connect the VIDEO jack, S-VIDEO jack, or
COMPONENT jacks whichever you want to use.
• To select progressive scanning mode (see page 6), use
COMPONENT jacks.
• To select the video output to match the color system of
your TV (PAL or NTSC), see page 6.
!
Auxiliary equipment
Red
Stereo audio cord
(not supplied)
For the Australian model
Stereo mini plug
(not supplied)
Composite video
cord (supplied)
White
4