Table of Contents
Advertisement
If the connection is successful, the current
network configuration will be displayed.
B. Static IP
Enter the IP address, Netmask, DNS address and
gateway manually.
Note:
Input limitation of IP address, netmask, DNS
address and gateway address
(1)Format: number 0-9, decimal point "."
(2) Mac Address
Note:
Ethernet will be disabled automatically if Wi-Fi is
connected to the network correctly.
5.2.
Signage Display
(1) General Settings
A. Signage display name
(2) Server Settings
A. Remote control
(3) Source Settings
A. Media player
B. CMND & Play
(4) System tools
A. Clear Storage
B. Import & Export
C. Clone
D. Admin Password
E. Swipe up
5.2.1. General Settings
1. Signage Display Name
Set PD name "PD_" + Ethernet Mac Address.
Note:
Input limitation:
(1) length: maximum 36 characters
(2) format: no limitation
5.2.2. Server Settings
1. Remote Control
Enable or disable the remote control.
Input the server address. If the server is not registered, you
will be asked to enter the PIN code.
Bind status:
(1) If the device does not have appropriate network
connection, a message "Network is disconnected" will
appear.
(2) If the device is equipped with network function, but
is not connected to the remote control server, a message
"Server is disconnected" will appear.
(3) Show "Server is unbinded" if the remote control server
replies its unbound status.
(4) Show "Server is binded" if the device is bound with
Sever successfully.
(5) Show Error PIN code if the PIN code is not correct.
5.2.3. Source Settings
1. Media Player (Please refer to the instructions of 4.4.
Media Player)
2. CMND & Play (Please refer to the instructions of 4.5.
CMND & Play)
5.2.4. System Tools
System tools consist of 5 main functions:
(1) Clear Storage
(2) Import & Export
(3) Clone
(4) Admin Password
(5) Swipe up
5.2.4.1 Clear Storage
The purpose is to clear data in the folder "Philips". It is
divided into 4 modes:
(1) Clear all Philips folders.
(2) Clear the folder "Philips" from the internal storage
only.
(3) Clear the folder "Philips" from the USB storage only.
(4) Clear the folder "Philips" from the SD card only.
A dialog box lists all folders that the system is going to clear.
29
86BDL6051C
Advertisement
Table of Contents
Troubleshooting
