Table of Contents
Advertisement
Preparing for Measurement
3
Set the input coupling of the waveform measuring
instrument to DC.
4
Connect the output
terminal of the
termination unit to a
BNC input terminal of
the waveform
measuring instrument.
• Insert the output terminal
• Insert the output terminal
The connection can be established with the unlock lever of
the termination unit pointing up, regardless of whether the
pair of the locking studs in the BNC input terminal on the
waveform measuring instrument is fixed in the horizontal or
vertical orientation.
38
straight.
until it clicks so that it is
securely locked in position.
Vertical Horizontal
Advertisement
Table of Contents
