Sony HT-S500RF Operating Instructions Manual page 32

properly to the subwoofer (refer to
the supplied Startup Guide).
 Check that "SPK >" – "MULTI" is set to
"ON" (page 24). If "SPK >" – "MULTI" is
set to "OFF," the sound is not output
from the surround speakers when
playing the sound of 2-channel
source.
 Multi-channel sound which has not
been recorded as surround sound is
not output from the surround
speakers.
The surround effect cannot be
obtained.
 Depending on the input signal and the
sound mode setting, surround sound
processing may not work effectively.
The surround effect may be subtle,
depending on the program or disc.
 To play multi channel audio, check
the digital audio output setting on
the device connected to the system.
For details, refer to the operating
instructions supplied with the
connected device.
USB Device Connection
The USB device is not recognized.
 Try the following:
 Turn the system off.
 Remove and reconnect the USB
device.
 Turn the system on.
 Make sure that the USB device is
securely connected to the
port (page 17).
 Check to see if the USB device or a
cable is damaged.
 Make sure that the USB device is on.
 If the USB device is connected via a
USB hub, disconnect it and connect
the USB device directly to the
subwoofer.
32
GB
Mobile Device Connection
BLUETOOTH connection cannot be
completed.
 Make sure that the BLUETOOTH
indicator on the subwoofer is lit
(page 7).
 Make sure the BLUETOOTH device to
be connected is turned on and the
BLUETOOTH function is enabled.
 Bring the BLUETOOTH device close to
the subwoofer.
 Pair this system and the BLUETOOTH
device again. You may need to cancel
the pairing with this system using
your BLUETOOTH device first.
 If "BT >" – "BT PW" is set to "OFF," set
to "ON" (page 26).
Pairing cannot be achieved.
 Bring the BLUETOOTH device close to
the subwoofer.
 Make sure this system is not receiving
interference from a wireless LAN
device, other 2.4 GHz wireless
devices, or a microwave oven. If a
device that generates
electromagnetic radiation is nearby,
move the device away from this
system.
 Pairing may not be possible if other
BLUETOOTH devices are present
around the system. In this case, turn
off the other BLUETOOTH devices.
Sound of the connected
BLUETOOTH mobile device is not
(USB)
output from the system.
 Make sure that the BLUETOOTH
indicator on the subwoofer is lit
(page 7).
 Bring the BLUETOOTH device close to
the subwoofer.
 If a device that generates
electromagnetic radiation, such as a
wireless LAN device, other
BLUETOOTH devices, or a microwave