Stealth Cam STC-G45NGMAX Instruction Manual page 10

!
TIME FORMAT – 12 HOUR (default): This setting is used to tell camera if the time
programmed and displayed on the Info Bar should be in the basic 12 hour (AM/PM) format
or the 24 hour (military) format. With this option blinking, pressing the UP or DOWN arrow
buttons will cause the camera to cycle between the two options. NOTE: Should the format
be changed to 24 hour, the previous SETUP TIME will now be adjusted as such and remove
the AM/PM part of the time.
!
MODE – This setting is used to tell the camera how it should take its images. The camera is
equipped with TRIAD Technology, allowing for 3 different options to be selected by the user.
With this option blinking, use the UP or DOWN arrow key to move between the options of:
PIR PHOTO, PIR VIDEO, or TIME LAPSE. Based upon the selection chosen the menus for the
camera will change.
OPERATING HOURS: This new function allows you to choose when you'd like the
o
camera to be active and working. By pressing the ENTER button and choosing between
the two options below and pressing Enter again, you will save your selection.
"
24/7 (default): This puts the camera in normal 24 hours a day working mode.
"
SCHEDULED: This allows you to tell the camera what time range it should be operational and
not to be operational.
www.stealthcam.com
877-­‐269-­‐8490
CAMERA PROGRAMMING -­‐ CUSTOM (CONT)
-­‐ START TIME (HH:MM): Start time you want the camera to be active.
(Default - 08:00AM)
-­‐ END TIME (HH:MM): End time you want the camera to be non-­‐active.
(Default - 05:00PM)
10
Page