Advertisement
Quick Links
Quick Guide
THANK YOU FOR PURCHASING A HOTPOINT PRODUCT
To receive more comprehensive assistance, register the
appliance on
www.hotpoint.eu/register
CONTROL PANEL
1. STEAM HYGIENE / MUTE button
2. FINAL CARE / KEY LOCK button
3. ON/OFF button
4. ACTIVE CARE button and indicator light
5. START/PAUSE button
6. RAPID / GREEN button
7. SPIN button
8. START DELAY button
9. TEMPERATURE button
10. WASH CYCLE SELECTOR KNOB
WASH CYCLE TABLE
Maximum load 9 kg
Power input in off mode 0.5 W / in left-on mode 8 W
Wash cycle
Eco 40-60 (1)
Cotton (2)
Synthetics (3)
Mixed
Delicates
White
Anti Stain 40°
Rapid 30 min
Spin & Drain *
Rinse & Spin
Steam Refresh
20°C
Wool
Anti Allergy
Bed & Bath
Dosing required Dosing optional
The cycle duration indicated on the display or instruction manual is an estimate based on
standard conditions. The actual duration may vary in relation to several factors, such as the
temperature and pressure of the incoming water, ambient temperature, amount of detergent,
load quantity and type, load balancing and any additional options selected.The values given
for programmes other than the Eco 40-60 programme are indicative only.
1) Eco 40-60 - Test wash cycle in compliance with EU Ecodesign regulation 2019/2014. The
most efficient programme in terms of energy and water consumption for washing normally
soiled cotton laundry.
Note: spin speed values shown on the display can slightly differs from the values stated in
the table.
PRODUCT DESCRIPTION
1. Top
2. Detergent dispenser drawer
3. Control panel
4. Handle
5. Porthole door
6. Drain pump (behind the plinth)
7. Plinth (removable)
8. Adjustable feet (2)
.
Temperature
Max.
spin speed
(rpm)
Setting
Range
1351
40 °C
40°C
1351
1351
40°C
1400
- 60°C
40°C
- 60°C
1200
40°C
- 40°C
1400
40°C
- 40°C
1000
40°C
- 90°C
1400
40°C
1000
- 40°C
30°C
- 30°C
1200
–
–
1400
–
–
1400
–
–
–
20 °C
- 20 °C
1400
40°C
800
- 40°C
60°C
40°C - 60°C
1400
60°C
- 60°C
1400
2.
7.
8.
Before using the appliance carefully read the Health and Safety guide.
Before using the machine, it is imperative that the transport bolts are removed. For more
detailed instructions on how to remove them, see the Installation Guide.
Add
Gar-
Pre-
Max.
Dura-
ments
wash
load
tion
(
)
(kg)
(h : m)
3:45
–
9,0
2:50
–
4,5
2,25
2:10
–
3:55
–
9,0
2:55
–
4,5
**
9,0
**
4,5
2:00
9,0
(***)
**
4,5
4,5
0:30
**
–
–
9,0
**
–
–
9,0
**
–
–
2,0
1:50
–
9,0
**
–
2,0
**
–
5,0
**
9,0
For all testing institutes:
2) Long cotton cycle: set wash cycle Cotton
3) Long synthetics cycle: set wash cycle Synthetics
* By selecting the Spin & Drain cycle and excluding the spin cycle, the washing machine will
drain only.
** The duration of the wash cycles can be checked on the display.
*** For Prewash press the "Temp." button until the symbol
**** After programme end and spinning with maximum selectable spin speed, in default
programme setting.
DETERGENT DISPENSER DRAWER
compartment 1: Pre-wash detergent (powder)
1.
compartment 2: Detergent for the wash cycle
3.
(powder or liquid)
If liquid detergent is used, it is recommended that
the removable plastic partition A (supplied) be
used for proper dosage.
If powder detergent is used, place the partition
4.
into slot B.
5.
compartment 3: Additives (fabric softeners, etc.)
The fabric softener should not overflow the grid.
! Use powder detergent for white cotton
6.
garments, for pre-washing, and for washing at temperatures over 60°C.
! Follow the instructions given on the detergent packaging.
1
DISPLAY
10
9
8
7
6
Detergents and
Recommended
Additives
detergent
Fabric
Wash
softener Pow-
Liquid
der
1
2
3
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
with a temperature of 40°C.
with a temperature of 40°C.
GB
2
3
4
5
53
0,80
59
32
53
0,48
52
29
53
0,24
41
25
49
1,10
97
45
35
0,80
55
43
–
–
–
–
–
–
–
–
55
0,89
89
42
–
–
–
–
71
0,18
37
27
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
55
0,14
78
22
–
–
–
–
–
–
–
–
–
–
–
–
lights up (only 90°).
A
1
2
3
Advertisement
Related Manuals for Hotpoint NM11946WSAUKN
Summary of Contents for Hotpoint NM11946WSAUKN
- Page 1 Quick Guide THANK YOU FOR PURCHASING A HOTPOINT PRODUCT Before using the appliance carefully read the Health and Safety guide. To receive more comprehensive assistance, register the Before using the machine, it is imperative that the transport bolts are removed. For more appliance on detailed instructions on how to remove them, see the Installation Guide.
- Page 2 WASH CYCLES The duration of the available wash cycles and the remaining time of a running cycle appear in section A (the display will show the maximum Follow the instructions on the symbols of the garment’s wash duration of the cycle chosen, which may decrease after several minutes, care label.
- Page 3 Empty the pockets: ADDING GARMENTS Objects such as coins or lighters can damage the washing machine and An icon on the display will signal when additional garments can be the drum. Check all buttons. introduced into the washing machine, without decreasing the washing Follow the dosage recommendation / additives performance.
- Page 4 When contacting the Technical Assistance Service, provide the codes shown on the adhesive label applied to the inside of the door. For User’s Repair & Maintenance Information visit www.hotpoint.eu. The model information can be retrieved using the QR-Code reported in the energy label. The label also includes the model identifier that can be used to consult the portal of the registry at https://eprel.ec.europa.eu...