Hotpoint NM11946BCAUK Quick Manual

Quick Guide

THANK YOU FOR PURCHASING A HOTPOINT PRODUCT
To receive more comprehensive assistance, register the
appliance on
www.hotpoint.eu/register

CONTROL PANEL

1. STEAM HYGIENE / MUTE button
2. FINAL CARE / KEY LOCK button
3. ON/OFF button
4. ACTIVE CARE button and indicator light
5. START/PAUSE button
6. RAPID / ECO button
7. SPIN button
8. START DELAY button
9. TEMPERATURE button
10. WASH CYCLE SELECTOR KNOB
WASH CYCLE TABLE
Maximum load 9 kg
Power input in off mode 0.5 W / in left-on mode 8 W
Wash cycle
Default
1 Mixed
2 Eco Cotton (1)
3 Cotton (2)
4 Synthetics (3)
5 Delicates
6 Wool
7 Anti Allergy
8 Anti Stain 40°
9 White
10 Steam Refresh
11 Rapid 30 min
12 Bed & Bath
13 Shirts
14 Spin & Drain *
15 Rinse & Spin
 Required dosage  Optional dosage
The cycle duration indicated on the display or instruction manual is an estimate based on
standard conditions. The actual duration may vary in relation to several factors, such as
the temperature and pressure of the incoming water, ambient temperature, amount of
detergent, load quantity and type, load balancing and any additional options selected.
1) Test wash cycle in compliance with regulation 1061/2010:
This cycle is designed for normally soiled cotton loads and is the most efficient in terms of
both electricity and water consumption; it should be used for garments washable at 60°C or
at 40°C. The actual washing temperature may differ from the indicated value.

PRODUCT DESCRIPTION

1. Top

2. Detergent dispenser drawer

3. Control panel
4. Handle
5. Porthole door
6. Drain pump (behind the plinth)
7. Plinth (removable)
8. Adjustable feet (2)
Max.
Temperature
spin speed
(rpm)
Range
40°C - 40°C
1400
60°C 1400
60°C
40°C 1400
40°C - 60°C
1400
40°C - 60°C 1200
40°C - 40°C 1000
40°C - 40°C
800
60°C - 60°C 1400
40°C - 40°C
1000
40°C - 90°C 1400
– – –
30°C - 30°C 800
60°C - 60°C
1400
40°C - 40°C 600
– – 1400
– – 1400
2.
7.
8.
.
Before using the appliance carefully read the Health and Safety guide.
Before using the machine, it is imperative that the transport bolts are removed. For more
detailed instructions on how to remove them, see the Installation Guide.
Add
Active
Gar-
Duration Care
Max.
ments
load (min- (
)
(
(kg)
utes)
**
9
 
–
9 225

9 235 –

–
9 235

4,5 175 –

4,5 **
 
** –
2

5 ** –

**
4,5
 
9 **
 
2 ** – –
4,5 **
 
**
9
 
2 ** –

9 ** – –
9 ** – –
For all testing institutes:
2) Long cotton cycle: set wash cycle 3 with a temperature of 40°C.
3) Long synthetics cycle: set wash cycle 4 with a temperature of 40°C.
*
By selecting the 14 cycle and excluding the spin cycle, the washing machine will drain only.
**
The duration of the wash cycles can be checked on the display.
***
For Prewash press the "Temp." button until the symbol
DETERGENT DISPENSER DRAWER
compartment 1: Pre-wash detergent
1.
(powder)
3. compartment 2: Detergent for the wash
cycle (powder or liquid)
If liquid detergent is used, it is recommended
that the removable plastic partition A
(supplied) be used for proper dosage.
4.
If powder detergent is used, place the partition
5.
into slot B.
compartment 3: Additives (fabric softeners,
etc.)
6.
The fabric softener should not overflow the grid.
! Use powder detergent for white cotton garments, for pre-washing, and
for washing at temperatures over 60°C.
! Follow the instructions given on the detergent packaging.
DISPLAY
10 9 8 7
Detergents and Recommended
Additives detergent
Pre- Fabric
Wash
wash softener Powder Liquid
)
1 2 3
–
 
–
  
–
  
–
  
–
  
–
 
–
 
–
  
–
 
(***)   
– – –
–
 
–
  
–
 
– – –
– –

GB
1 2 3
4
6 5
– – – –

53 0,87 57,5

53 1,24 94

53 1,24 94

53 0,54 55

– – – –

– – – –

– – –

– – – –

– – –

– – – – –
– – – –

– – –

– – – –

– – – – –
– – – – –
lights up (only 90°).
A
1
2
3