Connecting To A Wi-Fi Network Using A Pc Connected Wirelessly (Mac) - Sony MHC-V90W Help Manual

Help Guide
Home Audio System
MHC-V90W

Connecting to a Wi-Fi network using a PC connected wirelessly (Mac)

Note that the home audio system should be reset to the factory default for this connection. All BLUETOOTH device
registration (pairing) information is deleted. To use the BLUETOOTH connection after that, delete all pairing information
on the Mac, and then set pairing again.
This section describes how to connect a Mac and the home audio system wirelessly, then how to connect the home
audio system to a wireless router, using the Mac.
Do the following before starting.
Disconnect the LAN cable (not supplied) from the home audio system.
Place the home audio system closer to the wireless router.
Locate the SSID (the name of a wireless network) and encryption key (WEP or WPA), which are required to set up a
Wi-Fi network. The encryption key restricts access to devices on a network. It is used to make more secure
communication between the devices connected to wireless routers and access points.
Have the Wi-Fi network name (SSID) and password (encryption key) of the wireless router available for
1
reference.
For details, refer to the operating instructions supplied with your wireless router.
Reset the home audio system by using the remote control.
2
Unplug the AC power cord (mains lead), then plug it back in.
1.
Press (power) button to turn on the home audio system.
2.
Press OPTIONS button.
3.
Press /
4.
Press /
5.
6. Press /
[RESET] appears on the display.
The settings of the home audio system return to their factory defaults, and network settings and all
BLUETOOTH device registration (pairing) information are deleted.
Turn on the home audio system.
3
The power indicator lights up in green.
Connect the home audio system to the Mac.
4
Click at the top of the screen.
1.
2. Select [Open Network Preferences...].
Select [MHC-V90W] from the network list.
3.
Display the [Sony Network Device Settings] screen.
5
Launch a browser (Safari, etc.).
1.
Enter the following URL in the address bar.
2.
http://192.168.211.129
button repeatedly to select [SYSTEM], then press
button repeatedly to select [RESET], then press
button repeatedly to select [YES], then press
(enter) button.
(enter) button.
(enter) button.
37