Confirm that the yellow mark on the lock lever is not visible.
Close the battery cover securely. Not doing so may cause a water leakage.
To remove the battery pack
Open the cover and slide the battery ejection lever, then remove the battery pack.
To set auto power off function
It is recommended that you set the camera to turn off automatically, in order to decrease the battery
consumption.
Press the MENU button, then press the UP button or DOWN button to select the
Settings) -
(Auto power off) - time until the power is turned off, then press the REC/ENTER
button.
The default setting is
power off".
[6] Getting Started
Charging the battery pack
Turn off the power of the camera.
1
Charging is not possible when the camera is turned on.
Open the connector cover, connect the camera to an activated computer with the
2
micro USB cable (supplied).
The CHG (Charge) lamp lights in amber.
: Connector cover
: Micro USB cable
: CHG (Charge) lamp
(60 seconds). Change the setting as necessary. For details, see "Auto
(Camera