Table of Contents
Advertisement
Failed to format the recording media.
06-02
The memory card does not support XAVC S 100 Mbps movie recording.
Use an microSDHC/SDXC memory card of Class10 or faster when shooting in XAVC S format.
When the camera is in the loop recording mode, use an SDXC memory card or set the movie
format to
.
06-04 (FDR-X3000)
The memory card does not support XAVC S 100 Mbps movie recording.
Use the memory card that supports UHS-I U3 standard when you are shooting in XAVC S 100
Mbps.
When the camera is in the loop recording mode, use an SDXC memory card or set the movie
format to
.
06-05
Failed to recover the memory card.
06-06
The memory card is not inserted properly
The memory card is damaged.
06-09
There is no memory card inserted.
07-02
Failed to play.
There is an abnormality in the recording media.
08-01
Set the necessary settings for Ustream using "Camera Settings for Live Streaming" of the Action
Cam Movie Creator's camera settings.
08-03
The channel set by "Camera Settings for Live Streaming" of the Action Cam Movie Creator's
camera settings is incorrect.
This message also displays if other media starts streaming on the same channel while streaming
from the camera is performed.
Set the channel again.
08-04
The total time of saved video on Ustream has reached the limit. Stop streaming video.
08-05
The saving settings of video cannot be saved to Ustream because an error has occurred on the
network.
Some other network error has occurred.
Confirm the setting of the access point or the security of the access point using "Camera Settings
for Live Streaming" of the Action Cam Movie Creator's camera settings.
08-06
Advertisement
Table of Contents
