JVC KD-X168M Instruction Manual page 8

RADIO
Select a stored station
Press one of the number buttons (1 to 6).
(or)
1 Press .
Press VOL +/– to select a preset number, then press * ENTER.
2
Other settings
1
Press and hold .
2
Press VOL +/– to select an item (see the following table), then press
* ENTER.
3
Repeat step 2 until the desired item is selected/activated or follow the
instructions stated on the selected item.
4 Press to exit.
To return to the previous setting item, press
[TUNER SETTING]
[RADIO TIMER] Turns on the radio at a specific time regardless of the current source.
1 [ONCE]/[DAILY]/[WEEKLY]/[OFF]: Select how often the timer will be
turned on.
2 [FM]/[AM]: Select the source.
3 [01] to [18] (for FM)/[01] to [06] (for AM): Select the preset station.
4 Set the activation day*1 and time.
"M" lights up when complete.
Radio Timer will not activate for the following cases.
• The unit is turned off.
• [OFF] is selected for [AM SRC] in [SOURCE SELECT] after Radio Timer for AM
is selected. (Page 4)
6
ENGLISH
[SSM]
[LOCAL SEEK]
[IF BAND]
[MONO SET]
[NEWS SET]*2 [ON]: The unit will temporarily switch to News Programme if available. ;
.
[REGIONAL]*2 [ON]: Switches to another station only in the specific region using the "AF"
Default: [XX]
[AF SET]*2
[TI]*2
[PTY
SEARCH]*2
*1 Selectable only when [ONCE] or [WEEKLY] is selected in step 1.
*2 Selectable only when in FM source.
[SSM 01–06]/[SSM 07–12]/[SSM 13–18]: Automatically presets up to 18
stations for FM. "SSM" stops flashing when the first 6 stations are stored. Select
[SSM 07–12]/[SSM 13–18] to store the following 12 stations.
[ON]: Searches only FM stations with good reception. ; [OFF]: Cancels.
• Settings made are applicable only to the selected source/station. Once you
change the source/station, you need to make the settings again.
[AUTO]: Increases the tuner selectivity to reduce interference noises from
adjacent FM stations. (Stereo effect may be lost.) ; [WIDE]: Subjects to
interference noises from adjacent FM stations, but sound quality will not be
degraded and the stereo effect will remain.
[ON]: Improves the FM reception, but the stereo effect will be lost. ;
[OFF]: Cancels.
[OFF]: Cancels.
control. ; [OFF]: Cancels.
[ON]: Automatically searches for another station broadcasting the same
program in the same Radio Data System network with better reception when
the current reception is poor. ; [OFF]: Cancels.
[ON]: Allows the unit to temporarily switch to Traffic Information if available
("TI" lights up) while listening to all sources except in AM. ; [OFF]: Cancels.
Select a PTY code (see page 7).
If there is a station broadcasting a program of the same PTY code as you have
selected, that station is tuned in.