Troubleshooting - JVC KD-X168M Instruction Manual

REFERENCES
Change the display information
Each time you press , the display information changes.
• If the information is unavailable or not recorded, "NO TEXT", "NO NAME", or other information
(eg. station name) appears or display will be blank.
Source name Display information: Main
FM/AM Frequency
For FM Radio Data System stations only:
Station name/Program type
Radio text+ song title/Radio text+ artist
back to the beginning
USB For MP3/WMA/WAV/FLAC files:
Song title/Artist
Playing time
ANDROID Source name
AUX Source name
14
ENGLISH
Main display
Clock back to the beginning
Radio text Radio text+
Frequency
Album title/Artist Folder name
Clock back to the beginning
Clock back to the beginning
Clock back to the beginning

TROUBLESHOOTING

Symptom
Sound cannot be heard.
"MISWIRING CHECK WIRING
THEN PWR ON" appears.
"PROTECTING SEND SERVICE"
appears.
Source cannot be selected.
The unit does not work at all.
Correct characters are not
displayed.
Clock
• Radio reception is poor.
• Static noise while listening
File name
to the radio.
Playback order is not as
intended.
Elapsed playing time is not
correct.
"NOT SUPPORT" appears and
track skips.
"READING" keeps flashing.
Remedy
• Adjust the volume to the optimum level.
• Check the cords and connections.
Turn the power off, then check to be sure the terminals of
the speaker wires are insulated properly. Turn the power
on again.
Send the unit to the nearest service center.
Check the [SOURCE SELECT] setting. (Page 4)
Reset the unit. (Page 3)
• This unit can only display uppercase letters, numbers,
and a limited number of symbols.
• Depending on the display language you have selected
(page 5), some characters may not be displayed
correctly.
Connect the antenna firmly.
The playback order is determined by the file name (USB).
This depends on the recording process earlier (USB).
Check whether the track is a playable format.
(Page 13)
• Do not use too many hierarchical levels and folders.
• Reattach the device (USB).