Page 1
N331 Wireless Mini Optical Mouse User’s Guide Mouse Left mouse button Right mouse button Scroll wheel Charge port Battery cover Receiver storage compartment Battery cover release button Receiver release button Connect button 10. Power ON/OFF Switch Receiver 11. USB connector 12.
Page 2
Operating Instructions Step 1. To ensure correct operation, please make sure that the receiver is installed at least 20cm (8 inches) away from electronic devices (such as monitors or speakers). Step 2. Plug the receiver unit into a USB port on your system. The system will automatically detect the new hardware and install the device. Step 3.
Page 3
6. Please ensure that the battery cover is properly secured. Warranty Information Warranty • One year parts/labor from the date of purchase. • Please refer to the Warranty Terms and Conditions for your local region for further warranty details. • For more information, please visit: www.BenQ.com...
Page 4
FCC Warning This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
Page 6
NOTE: • The receiver/mouse may not function properly if placed on or near a metal surface. • If the mouse does not activate, please Repeat Step 3. • It is necessary to repeat Step 3 after any loss of power from battery replacement. Power-Saving Modes 1.
Page 7
Warranty Information Warranty • One year parts/labor from the date of purchase. • Please refer to the Warranty Terms and Conditions for your local region for further warranty details. • For more information, please visit: www.BenQ.com...
Page 8
FCC Warning This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
Need help?
Do you have a question about the N331 and is the answer not in the manual?
Questions and answers