Table of Contents
Advertisement
Insert the pump cap and screw it
4.
on as far as it will go.
90°
The handle on the pump cap must
be in a vertical position.
Close the maintenance flap.
5.
Before the next wash
To prevent unused detergent from
flowing straight into the outlet in the
next wash, run the Drain programme
after you have emptied the drain
pump.
Turn on the tap.
1.
Insert the mains plug.
2.
Switch on the appliance.
3.
Pour 1 litre of water into compart-
4.
ment II.
Start the Drain programme.
5.
16.6 Cleaning the water outlet
hose at the siphon
Switch off the appliance.
1.
Disconnect the appliance's mains
2.
plug from the power supply.
Cleaning and servicing en
Loosen the hose clamp and care-
3.
fully remove the water outlet hose.
Residual water may leak out.
Clean the water outlet hose and si-
4.
phon connecting piece.
Reattach the water outlet hose and
5.
secure the connection point using
the hose clamp.
49
Advertisement
Table of Contents
