Table of Contents
Advertisement
Service Component/PTY Search
Function
You can select your favorite Service Component from the
All Ensemble Service list.
Service Search Function
1
Touch [
] (Search).
2
Touch [All].
The All Service list in the Full Search mode screen is
displayed.
3
Touch the desired Service Component.
The Selected service component is received.
• The PTY is displayed in the Service Component (Primary) list
currently being received.
PTY Search Function
1
Touch [
] (Search).
2
Touch [PTY].
3
Touch the desired programme type.
The Service Component list that corresponds with the
selected programme type is displayed.
4
Touch the desired Service Component.
The selected Service Component is received.
Interruption Function
If Interruption Function is enabled, when the following
broadcast is received, the unit switches to the DAB source
screen automatically, and will receive broadcasts.
– Alarm (Emergency Broadcast)*1, 2
– TA(Traffic Announcement)*4
– Announcement*2, 3
– News Announcement*2
*1 Set Alarm to "On" in "Setting Emergency Announcement
Reception" (page 14).
*2 Not interrupted during the RDS broadcast reception.
*3 Select the Announcement type received in "Setting
Announcement Reception" (page 14), then set the
Announcement setting to "On. "
*4 The Interruption Function for Traffic Announcements
works with RDS broadcasts. Therefore, even if the current
source is DAB, a Traffic Announcement by RDS broadcast
may interrupt.
• "TA"/"NEWS"/"DAB News"/"Transport News"/"Warning"/
"Service"/"Area Weather News"/"Event Announcement"/
"Special Event"/"Program Information"/"Sport News"/
"Financial News" is displayed respectively on the Source title
section during each broadcast reception.
34
-EN
• The display differs during announcement reception depending
on the announcement type set in "Setting Announcement
Reception" (page 14).
• If no signal is received for more than 60 seconds, interrupt
function exits.
• To cancel the Interruption function, touch [TA], [NEWS],
[DAB News], [Transport News], [Warning], [Service],
[Area Weather News], [Event Announcement],
[Special Event], [Program Information], [Sport News] or
[Financial News].
• When the interruption broadcast is over, the unit returns to
the previous screen.
Displaying DAB Text
Text messages from a DAB station can be displayed.
1
Tune in a DAB station that transmits text
messages.
2
Touch the information display in the DAB
mode repeatedly to switch to the desired
display.
Dynamic Label Segment Mode
Mode
Dynamic Label Segment Mode
Dynamic Label Segment Mode:
Frequency / Ensemble Label / Service Label / PTY Name
Dynamic Label+ Mode:
Title Name / Artist Name / Song Name
About DAB/DAB+
What is DAB?
DAB (Digital Audio Broadcasting) is the third generation
broadcasting technology following the traditional
analogue technologies such as FM. The advantages of
DAB include being more robust with regard to noise,
interference, instability, etc., during radio signal
transmission. Also, it can provide stereo CD-quality
sound and digital information, and it can resist
multipath interference guaranteeing high-quality
reception for fixed, portable and mobile devices.
What is DAB+?
WorldDAB, the organisation in charge of the DAB
standards, announced DAB+, a major upgrade to the
DAB standard in 2006, when the HE-AAC v2 audio codec
(also known as eAAC+) was adopted. The new standard,
which is called DAB+, has also adopted the MPEG
Surround audio format and stronger error correction
coding in the form of Reed-Solomon coding. DAB+ has
been standardised as ETSI TS 102 563.
Dynamic Label+
Advertisement
Table of Contents
