Frigidaire GRMC2273CF Use & Care Manual page 10

10
DOOR REMOVAL
7. In certain circumstances, you may need
to remove the lower hinges for clearance
purposes. To gain access to the lower
hinges, first extend the Custom-Flex
Temp Drawer. Unscrew the 3 lower hinge
screws and slide the hinge inward.
Lower Hinge Removal
8. To reinstall the doors, reverse
the procedure.
IMPORTANT
Make sure the water line tubing goes
through the hole at the top of the
dispenser pocket. There is also a metal
wrap on the tubing to prevent damage
from the hinge rubbing against it. This
needs to be fixed back around the tube
in the proper location upon reinstallation
(just as long as the tube is protected
from the hinge).

NOTE
When reinserting the water tube and
replacing the top hinge cover, carefully
ensure the tube does not kink.
Once both doors are in place, ensure they
are aligned with each other and level
(Reference INSTALLATION for more de-
tails), and replace the top hinge cover.
To remove the Custom-Flex
Temp Drawer
1. Fully open the drawer.
2. Remove the basket from the drawer.
3. Unsnap the 4 cable ties by pressing
clip sides together and pushing
them through the opening.
4. Remove the screw and the retaining
clip and disconnect the harness