Replacing The Fuses - Pyle DT-9918T Operating Instruction

Do not operate the instrument with the battery cover
removed
1. Disconnect the test leads from the meter.
2. Open the battery cover by loosening the screw
using a Phillips head screwdriver.
3. Insert the battery into battery holder, observing the
correct polarity.
4. Put the battery cover back in place. Secure with the
two screws.
NOTE: If your meter does not work properly, check the
fuses and battery to make sure that they are still good
and that they are properly inserted.

REPLACING THE FUSES

WARNING: To avoid electric shock, disconnect the
test leads from any source of voltage before
removing the fuse /battery cover.
1. Disconnect the test leads from the meter and any
item under test.
2. Open the fuse door by loosening the screw on the
26