Fisher-Price DORA the EXPLORER K6672 Instruction Sheet page 3

This product contains small parts
in its unassembled state.
Adult assembly is required.
PUSH
Seat
1
• Fit the seat onto the frame. Push fi rmly near the back end
of the seat to "snap" it into place.
Rear
Wheel
(Indented
Side Down)
Straight
Axle
2
• Place one end of the straight axle into the cap nut. Tap
the end of the straight axle with a hammer. Make sure
the cap nut is securely attached to the straight axle.
• Slide a wheel hub, fl at side down, onto the straight axle.
• Slide a rear wheel, indented side down, onto the
straight axle.
• Slide a bushing, grooved side down, onto the straight axle.
CAUTION
Frame
Bushing
(Grooved Side Down)
Wheel Hub
(Flat Side Down)
Cap Nut
Assembly
3
• Turn the frame upside down.
• Insert the straight axle assembly through the holes in the
rear of the frame.
4
• Turn the assembly upright.
• Slide a bushing, smooth side fi rst, onto the end of the
straight axle.
• Slide a wheel, fl at side fi rst, onto the end of the straight axle.
• Slide a wheel hub, pointed end fi rst, onto the end of the
Straight
straight axle.
Axle
3
Straight Axle Assembly
Bottom View
Straight Axle
Bushing
(Smooth Side First)
Wheel
(Flat Side First)
Wheel Hub
(Pointed End First)