Operation - Alecto BW700BK Instruction Manual

• Only use the appliance for warming baby food in a domestic environment.
Incorrect use involves potential hazards to the user.
• Set up the baby bottle warmer so that it is steady and level and so that your
child cannot tip it over or pull it off the table or kitchen counter by its cable.
• The appliance should never be placed in the vicinity of hot surfaces,in hea-
ted ovens or in the vicinity of gas or electrical appliances, as this may cause
damage to the appliance.
• To protect you against an electric shock, the cable should not come into
contact with water or cooker hotplates.
• After warming, stir the contents of the jar. Before feeding your baby, check
on the inside of your wrist whether the temperature of the food is safe for
your baby. A sensible temperature is around 37°C, which is the same as
your own body temperature.
• After use unplug the appliance from the mains to prevent it from being
inadvertently switched on.
SAVE THE INSTRUCTIONS
To quickly warm up:
1. Place the bottle warmer on a stable surface, out of reach of children.
2. Pour water into the bottle warmer. (BW700(BK) 50ml, BW700TWIN 120ml)
3. Place the jar (without lid) or bottle into the bottle warmer.
4. Insert the plug into a 230Volts wall socket.
5. Press the
6. Now within 5 seconds, use the M button to select:
use the
the recommended warm-up time, see the next
page
7. 5 seconds after making your selection the heating
element of the bottle warmer will switch on while the
display starts counting down to 0.
8. When the countdown reaches 0:00, the display starts flashing for 1 minute.
During this minute, leave the jar or bottle in the warm water.
Depending on the amount of milk or food, the initial temperature and the mate-
rial of the bottle or jar, you may have to adjust the warm-up time.
button to switch on the bottle warmer.
or button to increase or decrease

OPERATION

20