Icemaker - LG GS-B680WL Owner's Manual

Setting and Resetting Lock
This locks the buttons on the control panel.
• When you press the Lock button for three
seconds, the Set/Reset icon on the control panel
lights. The function is enabled and disabled in
turn each time you press the button.
• If you press a button other than lock when the
child lock is set, the button will not function.
• When you press a button other than lock when
the child lock is set, the Set/Reset icon on the
•
for three seconds to disable the function.
Setting Pure N Fresh (Optional)
Bacteria and odor inside the appliance can
be minimized with the Pure N Fresh function.
However, the function is only effective for bacteria
onto food.
Setting Wi-Fi
The Wi-Fi button, when used with the LG Smart
ThinQ application, allows the refrigerator to
connect to a home Wi-Fi network.
• The Wi-Fi icon shows the status of the
refrigerator's network connection. The icon
illuminates when the refrigerator is connected
to the Wi-Fi network.
• Press and hold the Wi-Fi button for 3 seconds
to connect to the network. The icon blinks
while the connection is being made, then turns
on once the connection is successfully made.
22

Icemaker

This is where ice is manually produced and stored.
Making Ice
[Type1]
1
Lock button
2
3
• Be careful not to spill water when inserting the
[Type2]
Fill the icetray with water so that all the cubes
are equally full. And place it in the freezer
compartment.
Hold the handle of ice tray and pull it out.
Fill the ice tray with water so that all the
cubes are equally full.
Place the ice tray back to its position
CAUTION