Table of Contents
Advertisement
Notes for Moving and
Transporting
• Remove all food from inside the appliance. Then,
transport the appliance only after fixing fragile
parts such as shelves and the door handle with
tape. Failure to do so may cause appliance
damage.
• Pull the power plug out, insert and fix it into the
power plug hook at the rear or on top of the
appliance. Failure to do so may cause damage to
the power plug or floor scratch.
• When transporting the appliance, more than two
people should transport the appliance carefully.
Dropping the appliance, which is extremely
heavy, may cause personal injury or appliance
failure.
• When transporting the appliance over a long
distance, keep the appliance upright. The
appliance may fall over, causing malfunctions.
Never transport the appliance laying down as it
can cause a refrigerant circulation malfunction
when it is turned back on again.
12
Notes for Installation
• Install the appliance on a solid and flat area.
– If the appliance is installed on an uneven floor,
it can cause vibration and noise causing the
appliance to fall resulting in injury. It could
also cause the doors not to close correctly
and introduce moisture inside the unit during
operation.
– If the appliance front or rear is not level, adjust
the front feet so that it can be corrected.
Severe cases may need the floor to be packed
out with strips of thin timber.
• Avoid placing the unit near heat sources, direct
sunlight or moisture.
• Connect the power supply cord (or plug) to the
outlet. Don't double up with other appliances on
the same outlet.
• After connecting the power supply cord (or plug)
to the outlet, Wait two or three hours before
you put food into the appliance. If you add food
before the appliance has cooled completely, your
food may spoil.
• Models with handles should be located at least
55 mm from the wall on the hinge side to open
door by 90°.
• Allow over 55 mm clearance to the right, left,
back and top when installing.
Advertisement
Table of Contents
