Page 1
Important Waterproof/Safety Information Important: DO NOT submerge the BT29 speaker in water,this unit is not intended to function properly after being under water. BT29 is rated IPX6,which means the speaker can be heavily splashed with water or left in the rain(but not submerged in water) for approximately a limited time.If the BT29 gets wet,it is...
Page 2
Description: 1.ON/OFF button 2.Play/Pause/Phone 3.MIC 4.Previous/Volume – 5.Next/Volume + 6.Blue LED(Bluetooth) 7.Red LED(Charging) 8.Green LED(AUX) 9.Micro USB Charging Port 10.AUX in Port Included: 1.Speaker 2.USB Micro Charging Cable 3.3.5 mm Audio Cable 4.User Manual...
Page 3
The unit will automatically go into “Pairing Mode” when it is powered ON. Go into your Bluetooth device settings menu and look for “BT29”. After the unit has paired and connected, it will re-connect automatically when the unit is powered on and the device is in range.
Aux-In Mode Plug in the supplied 3.5 mm cable into the unit. The other end is connected to your device. The Green LED will only illuminate when in “Aux” mode. Please note music and volume can be controlled by your device. Charging Attach the USB cable to the unit, and plug into any USB charger.
Page 5
provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation.
Need help?
Do you have a question about the BT29 and is the answer not in the manual?
Questions and answers