Adding Detergent And Care Product; Starting The Programme; Soaking Laundry; Adding Laundry - Bosch WAJ240L8SN User Manual And Installation Instructions

Insert the detergent drawer.
3.
Adding detergent and care
product
Notes
¡ Please read the information in the
Safety → Page 4 and Preventing
material damage → Page 11 sec-
tions to ensure that you use the
appliance safely.
¡ Do not use the measuring aid for
liquid detergent for gel detergents,
washing powder, or if Prewash or
"Ready in" time are activated.
Requirement: Find out the optimum
dosage for detergent and care
product. → Page 30
Pull out the detergent drawer.
1.
Pour in detergent.
2.
→ "Detergent drawer", Page 20
If required, add the care product.
3.
Push in the detergent drawer.
4.

Starting the programme

Note: If you want to change the time
until the programme ends, set the
"Ready in" time first.
Press .
▶
a The drum rotates and load detec-
tion takes place. This can take up
to 2 minutes, after which water
enters the drum.
a The display shows either the pro-
gramme duration or the "Ready in"
time.
a After the programme has ended,
the display shows: "End".

Soaking laundry

You can soak the laundry before
washing in the appliance by pausing
the programme.
Note: No additional detergent is re-
quired. The washing solution is then
used for washing.
Start the programme.
1.
To pause the programme, after ap-
2.
prox. 10 minutes, press
To resume the programme, after
3.
the desired soaking time, press
.

Adding laundry

Note: Please read the information in
the Safety → Page 4 and Preventing
material damage → Page 11 sections
to ensure that you use the appliance
safely.
Press .
1.
The appliance is paused and
checks whether it is possible to
add or remove laundry. Take note
of the programme status.
→ "Display", Page 21
Add or remove laundry.
2.
Close the door.
3.
Press .
4.
Basic operation en
.
33