Cisco NSS324 Quick Start Manual page 20

Insert the product CD.
S 1
TEP
Double-click the CD icon on the desktop to view the contents in
S 2
TEP
Finder.
From the ...\MAC\ folder, double-click CISCO_NSSCD_V....dmg.
S 3
TEP
From the ..\AutoRun\ folder, double-click AutoRun to launch the
S 4
TEP
Setup Wizard.
Under First Time Installation, click Start. The End-User License
S 5
TEP
Agreement window opens.
To accept the End-User License Agreement, check the I accept
S 6
TEP
this agreement check box and click Next. The First Time
Installation Wizard window opens.
Click Next to run the wizard.
S 7
TEP
From the Hardware Installation Guide window, select your model.
S 8
TEP
Follow the prompts to check the package contents, install the disk
S 9
TEP
drives, and connect the equipment.
If you have already installed the disk drives and connected
N
OTE
the equipment, click Skip until you reach the System Configuration
window.
From the System Configuration window, click Next to go to NAS
S 10
TEP
configuration. The NAS Configuration window opens.
Click Next. The Discovering the NAS window opens and advises
S 11
TEP
when the uninitialized device is found.
If your device is already configured, click Skip to go to Map
N
OTE
Network Drive. See
Click Next. The Web Configuration window opens.
S 12
TEP
The First Time Installation Wizard detects the NAS and prompts
S 13
TEP
you to go through the web configuration process. From the drop-
down list, select a NAS device.
Click Next to continue. You are directed to a configuration window
S 14
TEP
to complete the settings step by step. The Welcome window
displays.
Click Next. You are redirected to a window where you can enter
S 15
TEP
the name for this server.
In the Server Name field, enter a name to identify the NAS device.
S 16
TEP
20
Mapping a Network Drive, page
Cisco Small Business NSS324 and NSS326 Smart Storage
24.