Enabling Security And Creating An Administrator User; Disabling Security - Lenovo px12-450r User Manual

Enabling Security and Creating an Administrator User

With security turned on, only administrator users can view or change settings on the px12-450r, including
creating or deleting users and Shares. When you create users, you limit access to your px12-450r to
specific people, and when you secure Shares, you limit data access to specific users.
1. On the Security page, click the switch on.
2. When you turn security on, you will be asked to create an administrator user. Provide a username
and password, and then confirm your password.
3. Encryption is always available when you access your px12-450r using https. By setting local
encryption, you enforce encryption on your local network. By setting remote encryption, you
enforce encryption outside your local network, such as through the internet. Choices for both
encryption types are Not required, Passwords only (passwords are encrypted through https), and
Always (encryption is always enforced). Always encrypting communication is safest, but can
impact performance.
When security is turned on, browser communications with the px12-450r are encrypted.
Therefore, each computer that attempts to access the px12-450r may encounter a security
warning, which can be safely ignored. In addition, you may be asked to accept a signed certificate
for the px12-450r , which you should accept. If you change the device name at a later date, these
warnings may appear again.
4. If you have your own security certificate, you can load it by selecting Use an imported
certificate and browsing to the certificate to load it.
5. Click Apply to save your changes.
6. Click here to learn how to create users.
7. Click here to learn how to secure any existing or new Shares.

Disabling Security

Disabling security will cause all defined users to be deleted.
If you are using other features on your px12-450r that require security, you cannot disable security
until those features are also disabled.
1. On the Security page, click the switch off.
2. Disabling security will cause all defined users and groups to be deleted. Check the box to disable
security.
3. Click Apply to save your changes.
Security is disabled.
Securing Your px12-450r Network Storage and Contents
Enabling Security and Creating an Administrator User 71